home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.multimedia
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!uwm.edu!ux1.cso.uiuc.edu!news.cso.uiuc.edu!mrcnext.cso.uiuc.edu!lam
- From: lam@mrcnext.cso.uiuc.edu (Ken Lam)
- Subject: Re: Need Macintosh Quadra RGB to NTSC conversion
- References: <1992Nov20.201545.1669@serval.net.wsu.edu> <g_rehn-231192102004@esumac18.csu.murdoch.edu.au>
- Message-ID: <By66E0.9t4@news.cso.uiuc.edu>
- Sender: usenet@news.cso.uiuc.edu (Net Noise owner)
- Organization: University of Illinois at Urbana
- Date: Mon, 23 Nov 1992 12:51:35 GMT
- Lines: 35
-
- g_rehn@csuvax1.murdoch.edu.au (Geoff Rehn) writes:
-
- >In article <1992Nov20.201545.1669@serval.net.wsu.edu>, Leonard Hermens
- ><lhermens@eecs.wsu.edu> wrote:
- >>
- >> I need to convert RGB (red-green-blue) video signals from a Quadra to
- >> NTSC TV
- >> standard video. I realize I can get black and white NTSC easily from the
- >> Quadra built-in video, but I need wiring information or info about
- >> exisiting
- >> products that do this conversion. Pricing and vendor information would
- >> be helpful, too.
- >>
-
- >NeoTech ship a video encoder that will convert the Mac RGB
- >to PAL, S-Video or NTSC. This is an external encoder that takes the video
- >signal and converts it. May need to boot up the VRAM on the Quadra to
- >around 1Mb. The down side of the NeoTech is that (in PAL at least) the
- >output is only 256 colours, despite millions on board.
- >In Australia, FIRMWARE DESIGN are the suppliers, at around $A500 - 600.
-
- >There is another box out there, newly released, but I haven't tracked it
- >down yet.
-
- RasterOps has one for about 450-500 $US. It will run off the Quads built in
- video, though I run it off a 24xltv.
-
-
- --
- Ken Lam (803)-884-7615 (H)
- System Administrator (803)-792-4969 (W)
- Senior Systems Consultant (803)-792-5446(FAX)
- Netware/UNIX System Programmer/Integrator lam@jove.cofc.edu
- MultiMedia Works & Video Productions ======= Teaching the world in better ways
-
-