home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!usc!zaphod.mps.ohio-state.edu!rpi!psinntp!psinntp!ncrlnk!ncr-mpd!Scott.Johnson
- From: Scott.Johnson@FtCollinsCO.NCR.COM ( Scott Johnson)
- Newsgroups: comp.lang.verilog
- Subject: Re: Does Cadence still exist?
- Message-ID: <SCOTT.JOHNSON.92Nov17103251@talon.FtCollinsCO.NCR.COM>
- Date: 17 Nov 92 10:32:51 GMT
- References: <BxsnHF.K7s@cs.psu.edu>
- Sender: uucp@ncr-mpd.FtCollinsCO.NCR.COM
- Organization: NCR Microelectronics, Ft. Collins, CO
- Lines: 23
- In-reply-to: kenh@leps5.phys.psu.edu's message of 16 Nov 92 05:34:26 GMT
-
- >>>>> On 16 Nov 92 05:34:26 GMT, kenh@leps5.phys.psu.edu (Ken Hornstein) said:
- K> Nntp-Posting-Host: leps5.phys.psu.edu
-
- K> I tried calling the number I have for Cadence, but it was disconnected. Is
- K> Cadence still in existance? If so, could someone post/e-mail me their
- K> number? If not, does anyone know of anyone who has taken over support
- K> for Verilog?
-
- K> Thanks,
-
- K> --Ken
-
- Their hotline support number is 1-800-CADENC2 (This is from memory, but
- I believe correct) as long as you are paying maintenance, you should get
- support.
-
- --
- -----------------------------------------------------------
- E-Mail: Scott.Johnson@FtCollinsCO.NCR.com
- uunet!ncrlnk!ncr-mpd!Scott.Johnson
- My opinions are mine and mine alone (unless I only live in your dream, in
- which case they are yours and I denounce all responisbility).
- GA to SK
-