home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.dcom.sys.cisco
- Path: sparky!uunet!charon.amdahl.com!pacbell.com!att-out!cbfsb!cbnewsg.cb.att.com!mikeh
- From: mikeh@cbnewsg.cb.att.com (michael p.herlihy)
- Subject: SRB Native Mode over Frame Relay?
- Message-ID: <1992Nov17.224339.6885@cbfsb.cb.att.com>
- Sender: news@cbfsb.cb.att.com
- Organization: AT&T
- Distribution: usa
- Date: Tue, 17 Nov 1992 22:43:39 GMT
- Lines: 13
-
-
- Is it possible in 9.0 to use Source-Route Bridging Native Mode
- encapsulation? According to my beta release cisco manuals the
- serial line on the point-to-point circuit must run HDLC.
-
- However, I have a customer that is running Source-Route Bridging
- Native Mode with frame-relay encapsulation....
-
- --
- So in your discussions of the nuclear freeze proposals, I urge you to
- beware the temptation of pride--the temptation blithely to declare
- yourselves above it all and label both sides equally at fault, to ignore
- the facts of history and the aggressive impulses of an evil empire....
-