home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.dcom.fax
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!caen!destroyer!news.iastate.edu!pooh.cc.iastate.edu!rwifall
- From: rwifall@nmsu.edu (Richard J Wifall)
- Subject: Re: Need syntax to set T.30 session subparam code VR to 1
- In-Reply-To: sam@oxford.cs.berkeley.edu's message of Fri, 20 Nov 1992 16:20:22 GMT
- Message-ID: <RWIFALL.92Nov20121332@dante.nmsu.edu>
- Sender: news@news.iastate.edu (USENET News System)
- Organization: NMSU Computer Science
- References: <RWIFALL.92Nov19225427@dante.nmsu.edu> <ANDERSON.92Nov17142813@zymurgy.bms.com>
- <1992Nov20.162022.26846@pasteur.Berkeley.EDU>
- Date: Fri, 20 Nov 1992 18:13:32 GMT
- Lines: 25
-
- In article <1992Nov20.162022.26846@pasteur.Berkeley.EDU> sam@oxford.cs.berkeley.edu (Sam Leffler) writes:
-
-
- > In article <RWIFALL.92Nov19225427@dante.nmsu.edu>, Richard J Wifall writes:
- > > You probably will want to do AT+FDCC:1,5,0,2,0,0,0..
- >
- > The set of parameters and the order that you give is correct, but you
- > want to use the +FDIS command and to set the values you need to
- > use +FDIS=VR,BR,WD,LN,DF,EC,BF,ST. Also, since you just want
- > to change the VR parameter, you can leave off the trailing parameters
- > (they should not be changed) and so all you need is +FDIS=VR.
- Actually, both AT+FDCC and AT+FDIS will work as the DCE copies
- +FDCC into +FDIS.. +FDIS is only for the current session, and the DCE
- initializes it from the +FDCC params each time +FDCC is written, when
- the DCE is initialized and at the end of a session..
-
- > Sam Leffler Voice: (415) 390-1269
-
- Richard
- --
- +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=++=+==+=+=+=+=+=+=+=+=+=+
- |Richard Wifall - rwifall@nmsu.edu - IRCnick: TheJazz - Member GS<>IRC |
- |-/-\-/-\-/-\-/-\-/-\-/-\-/-\-/-\-/-\-/-\-/-\-/-\-/-\-/-\-/-\-/-\-/-\-/-\-/-\-|
- |Ask me about DeskTracker, BorderBlinker, and a demo that Dave hasn't finished|
- +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
-