home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: alt.drugs
- Path: sparky!uunet!spool.mu.edu!agate!linus!linus.mitre.org!news
- From: lewis@aera8700.mitre.org (Keith Lewis)
- Subject: Re: Blotting Acid
- Message-ID: <1992Nov23.140624.6594@linus.mitre.org>
- Sender: news@linus.mitre.org (News Service)
- Nntp-Posting-Host: aera8700.mitre.org
- Organization: The MITRE Corporation
- References: <By1L82.AC4@willamette.edu>
- Date: Mon, 23 Nov 1992 14:06:24 GMT
- Lines: 28
-
- In article <By1L82.AC4@willamette.edu>, amessing@willamette.edu (Adam Messinger) writes:
- >Does anyone out there know how acid is normally blotted? Is the blotter
- >dipped in a tray containing the liquid or is a pipette used to dispense it
- >square by square? How is the dosage controlled? Thanks for your help...
-
- Dipped. Laid flat on a screen to dry.
-
- If you have some LSD in solution ("liquid acid") that you want to put on
- blotter, here's how you do it:
-
- Buy at least one more sheet of blotter than you need. Weigh a test sheet;
- then dip it in water and lay it flat on a screen until it stops dripping
- (should be a minute or two). Weigh it again. The added weight is the
- amount of water which was absorbed by the blotter. You can convert this to
- volume using 1 g/ml as the density of water.
-
- Now figure out how many sheets you want and how much of your solution is
- appropriate to make a reasonable dose/square. Add water if you need to, and
- put your solution in a tray. Dip the sheets and lay them flat on a screen
- above the tray, so any extra drips back in.
-
- This is not from any first-hand experience, just general knowledge of
- chemistry. I may have left out some precautions, such as "Don't touch the
- stuff with your hands unless you feel like tripping."
-
- Keith Lewis klewis@mitre.org "Mr. Cheap"
- I don't dance to music; music dances to me. Email me for my PGP key.
- The above may not (yet) represent the opinions of my employer.
-