home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!wupost!kuhub.cc.ukans.edu!moe.ksu.ksu.edu!hobbes.physics.uiowa.edu!news.uiowa.edu!icaen.uiowa.edu!gwestern
- Newsgroups: sci.electronics
- Subject: Serial to Parallel conversion RS-232 --> 32 bit Parallel
- Message-ID: <1992Jul29.151608.28485@news.uiowa.edu>
- From: gwestern@icaen.uiowa.edu (Gary Edwin Western)
- Date: Wed, 29 Jul 1992 15:16:08 GMT
- Sender: news@news.uiowa.edu (News)
- Organization: Iowa Computer Aided Engineering Network, University of Iowa
- Nntp-Posting-Host: l_ecn07.icaen.uiowa.edu
- Lines: 9
-
- I was wondering if there is an easy way to "capture" 4 serial bytes from
- an RS-232 serial port on an IBM compatible machine to be output as 1 32 bit
- wide latched byte. Perhaps a combination UART and a count to 4 timer?
- Any help on this matter would be greatly appreciated! Please respond to
- E-Mail: gwestern@icaen.uiowa.edu
-
- Thank you all- Gary E Western
-
- ================================================================================
-