home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!usenet.ins.cwru.edu!agate!ucbvax!hplabs!hplextra!hpl-opus!hpspdla!billg
- From: billg@hpspdla.spd.HP.COM (Bill Gingras)
- Newsgroups: rec.models.rc
- Subject: Re: Noise elimination for embedded aileron servos
- Message-ID: <15680021@hpspdla.spd.HP.COM>
- Date: 29 Jul 92 14:34:07 GMT
- References: <Bs45Bo.DB3@world.std.com>
- Organization: HP Stanford Park - Palo Alto, CA
- Lines: 9
-
-
- Is it possible that the aileron movement is restricted? This will cause
- hum and a slight amount of jiggle.
-
- Also, could it be possible that your radio always had a problem on the
- aileron channel and you just never used it before? This happened to me.
- It turned out to be a bad solder joint in the Tx.
-
- - Bill G
-