home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky rec.models.rc:3059 sci.electronics:13564
- Newsgroups: rec.models.rc,sci.electronics
- Path: sparky!uunet!ftpbox!mothost!lmpsbbs!bobwo
- From: bobwo@ecs.comm.mot.com (Bob Woodhouse)
- Subject: Re: How to dispose of NiCads?
- Organization: secure_comm
- Date: Wed, 29 Jul 1992 14:40:13 GMT
- Message-ID: <1992Jul29.144013.24001@lmpsbbs.comm.mot.com>
- References: <1992Jul28.140405.28429@gdunix.gd.chalmers.se> <p5mmrwq.brunette@netcom.com> <1992Jul29.084514@ufps9.unifr.ch>
- Sender: news@lmpsbbs.comm.mot.com (Net News)
- Nntp-Posting-Host: 145.1.147.44
- Lines: 36
-
-
- >|> 300 ohm Charge
- >|> 5W / Switch
- >|> 20-40 + O---/\/\/\----o------o o------------o-------------------------o
- >|> VDC | | |
- >|> | Zap | |
- >|> | Switch | +|
- >|> | ___|___ | -----------
- >|> o------o o---------o -----
- >|> | | + Shorted |
- >|> 6000 micro- | + ------- Cell |
- >|> Farad, 40V _________ | | |
- >|> Capacitor --------- |_____| Volt |
- >|> | | meter |
- >|> | | |
- >|> - O-------------o----------------------o-------------------------o
- >|>
- >
- >Please correct me if i get this wrong, i guess the above circuit requires
- >to remove the dead cell from the multi-cell pack, right ?
- >
-
- Why would you have to remove the cell -- just hook up to the cell of interest and go.
-
- >Which means, one has to take the Ni-Cd pack appart, and get the dead cell out.
- >The cells are usually connected with a point welded metal plate, which requires
- >you to rip the metal plate off the cell.
- >Now, once you fixed your shorted cell ( you hope ),with the above circuit ,you will have to
- >solder the cell back in place, which isn't that abvious, if you apply to much
- >heat when soldering you may damage the cell, if you don't apply enough heat you get
- >a cold solder spot, in which case it may brake loose, due to vibrations.
- >
- >--
- >ben
- Bob Woodhouse
-
-