home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky misc.wanted:7193 comp.sys.ibm.pc.hardware:19976 comp.sys.ibm.pc.misc:10696
- Path: sparky!uunet!mcsun!uknet!warwick!rlinf!cs-pc.cc.rl.ac.uk!cs
- From: cs@ib.cc.rl.ac.uk (C. Stratford)
- Newsgroups: misc.wanted,comp.sys.ibm.pc.hardware,comp.sys.ibm.pc.misc
- Subject: Re: **Turbo button for 486-33**
- Message-ID: <cs.14.711706136@ib.cc.rl.ac.uk>
- Date: 21 Jul 92 08:08:56 GMT
- References: <1992Jul19.042619.26548@CS.ORST.EDU>
- Sender: news@inf.rl.ac.uk
- Followup-To: misc.wanted
- Organization: Rutherford Appleton Laboratory
- Lines: 29
-
- In article <1992Jul19.042619.26548@CS.ORST.EDU> valhert@mist.CS.ORST.EDU (valhert) writes:
- >Hi Everyone,
- Greetings
-
- >I have a 486-33 computer and I have the turbo disconnected.
- >Can someone help me in connecting the turbo again? I have
- >an AMI-bios and a full tower. Thanks you for the help.
-
- You don't give us much to go on. When you say the turbo is disconnected,
- do you mean the wire between the button and the circuit board is broken
- or just unplugged?
-
- If it's just unplugged, then all you probably have to do is open up the
- machine and locate the cable (it's usually fairly easy, just follow the wire
- from the button.) Now, near the one side of your circuit board, there should
- be a large collection of pins sticking up (usually with assorted cables
- connected to them), two of these empty pins will be the turbo connectors
- (they might even be labelled if you're lucky.) Plug in the cable and voila!
-
- If the cable is broken, do the above, but attach a new cable instead of
- using the old one.
-
- Is that what you wanted?
-
- Chris.
- ----------------------------------------------------------------------------
- | All that is gold does not glitter | Chris Stratford |
- | Not all those who wander are lost. | cs@ib.cc.rl.ac.uk |
- ----------------------------------------------------------------------------
-