home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!gatech!usenet.ins.cwru.edu!agate!dog.ee.lbl.gov!nosc!manta!welsh
- From: welsh@nosc.mil (Robert C. Welsh)
- Newsgroups: comp.unix.bsd
- Subject: Cannot install 0.1
- Message-ID: <1992Jul27.214214.24706@nosc.mil>
- Date: 27 Jul 92 21:42:14 GMT
- Organization: Naval Ocean Systems Center, San Diego, CA
- Lines: 51
-
-
- I Need Help with 386BSD-0.1 install
-
- When I try to boot TinyBSD it senses the following:
-
- " pc0<color> at 0x60 irq 1 on isa
- com1 at 0x3f8 irq 4 on isa
- com2 at 0x2f8 irq 3 on isa
- wd0<DTC6X80> at 0x1f0 irq 14 on isa
- fd0 drives 0: 1.2M at 0x3f0 irq 6 drq 2 on isa
- npx0 at 0xf0 irq 13 on isa "
-
-
- The first time I try to boot after power up I get as far as
-
- " changing root device to fd0a "
-
- and a second later I get
-
- " trap type 18 code = 0 eip = fe055532e cs = 8 eflags = 10246
- cr 2 0 cpl 4040
- panic: trap
- hit reset please "
-
- If I hit reset it goes through the above but further and comes up on the floppy.
- I can then do most things in TinyBSD but as soon as I run install it gives me
- almost the same messages as above (the differences are underlined):
-
- " trap type 18 code = 0 eip = fe055532e cs = fe41008 eflags = 10246
- ------------
- cr 2 dee0 cpl 4040
- ----
- panic: trap
- updating disks "
-
- My hardware is as follows:
-
- AST Premium/386C with 4 MB ram, cache disabled, shadow ram disabled, 387 co-
- processor. (Premium 386 BIOS Ver 2.0)
-
- Oak Technology VGA board (VGA BIOS 067 V1.03) with 512 memory
-
- DTC 6280 ESDI disk controller running a Maxtor 4380EXT hard drive (340MB)
-
- Hope someone can help as I have been following the group for months waiting
- to get a shot at this (I just got the disk controller and drive)!
-
- welsh@manta.nosc.mil
-
- "Strange women, lying in ponds, distributing swords is no basis for a system
- of government" - Monty Pyton
-