home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!gatech!mailer.cc.fsu.edu!sun13!sun13.scri.fsu.edu!hudgens
- From: hudgens@SCRI.FSU.EDU (Jim Hudgens)
- Newsgroups: comp.unix.bsd
- Subject: Re: 386bsd 0.1 - Advice on bootstrap debugging needed.
- Message-ID: <HUDGENS.92Jul24111626@sun13.SCRI.FSU.EDU>
- Date: 24 Jul 92 15:16:26 GMT
- References: <greg.711922033@hibp1.ecse.rpi.edu> <1992Jul24.132519.7656@pixie.aii.com>
- Sender: hudgens@sun13.scri.fsu.edu
- Organization: SCRI, Florida State University
- Lines: 27
- In-reply-to: jbh@aii.com's message of 24 Jul 92 13:25:19 GMT
-
- In article <1992Jul24.132519.7656@pixie.aii.com> jbh@aii.com writes:
- >In article <greg.711922033@hibp1.ecse.rpi.edu> greg@ecse.rpi.edu (Greg) writes:
- >>I seem to have a problem booting that is timing dependant. My machine will
- >>boot off wd0 about 95 % the time when in low speed mode. In high speed (33MHz)
- >>it boots only about 20% of the time.
- >Greg,
- > I think you'll find if you pick up either the latest bootwd (patched) or
- >grabbed the diff's or uuencode we posted to this group, your problems will
- >go away.
-
- I'll second this. Tried everything to get 0.1 to boot off of the hard
- drive, and then grabbed the patched dist.fs, and it now works fine.
- [[[ 386/25, AMI Bios, IDE with 525M Fuji ]]]
-
- On another note, anyone have a kernel with an ethernet driver for
- an 3COM 3c501? Anyone working on one?
-
- By the way, 386BSD looks better and better and better the more I play
- with it.
-
- Thanks,
- JHH
-
- --
- Jim Hudgens Supercomputer Computations Research Institute
- hudgens@sun13.scri.fsu.edu
-
-