home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.unix.amiga
- Path: sparky!uunet!gatech!news.ans.net!sangster
- From: sangster@news.ans.net (Paul Sangster)
- Subject: Re: 2.1 Install problems
- Message-ID: <1992Jul25.203739.14828@ans.net>
- Sender: sangster@ans.net
- Date: Sat, 25 Jul 1992 20:37:39 GMT
- Organization: Advanced Network & Services - Reston, VA
- Followup-To: sangster@ans.net
- Lines: 24
-
- Ooops, I think I made a typo on my previous post. The error message
- output during the installation of 2.1 is actually the following:
-
- a3091: 0x49 1 0x78EAD98
- ^
- This was mistakenly reported as an 'F'. Actually it may have been
- an
- 'F' before I started trying different configurations, but now its a
- '9'. Does this give a better clue?
-
- I have a Wangtek 5150ES with a #30559 board (although the label says
- #30603-240). I have heard that RP2 & RP3 are the DIP/SIP resistor
- packs and they are in my board. Anyone out there have a similar
- configuration?
-
- Thanks again,
-
- Paul
-
- --
- _______________________________________________________________________
- Paul Sangster Snail mail: 1895 Preston White Dr.
- Advanced Network & Services Suite 310
- Information & Applications Services Group Reston, Va 22091
-