home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!paladin.american.edu!darwin.sura.net!mips!zaphod.mps.ohio-state.edu!cs.utexas.edu!asuvax!ncar!noao!arizona!arizona.edu!ece.arizona.edu!mshah
- From: mshah@ece.arizona.edu (Munil A. Shah)
- Newsgroups: comp.sys.sun.admin
- Subject: X11R5 installation problem on Sun..
- Message-ID: <1992Jul27.130206@ece.arizona.edu>
- Date: 27 Jul 92 20:02:06 GMT
- Reply-To: mshah@ece.arizona.edu (Munil A. Shah)
- Distribution: world,local
- Organization: University of Arizona Dept. of Electrical and Computer Engineering
- Lines: 13
- Nntp-Posting-Host: helios.ece.arizona.edu
-
-
- I compiled and installed X11R5. I edited the makefile to change
- the ProjectRoot. So binaries,libraries etc. were installed into non-default
- directories. Now the problem is : While starting the xinit, it can't find
- the fonts of the new lib directory. So it uses the default ones. When I
- run 'xset q' command I can see that it is looking under the old directory
- (/usr/lib...) for fonts.
- Is there any way I can fix this problem, without replacing the
- links in /usr/lib?.(The links in this directories currently point to
- X11R4 and I don't want to disturb these links until I finally decides
- to replace R4 by R5).
-
- -Munil
-