home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.sgi
- Path: sparky!uunet!centerline!noc.near.net!wpi.WPI.EDU!nntp!mvoorhis
- From: mvoorhis@joseph.WPI.EDU (Michael C Voorhis)
- Subject: HELP - din 8 pinout & *map*
- Message-ID: <MVOORHIS.92Jul28212746@joseph.WPI.EDU>
- Sender: news@wpi.WPI.EDU (USENET News System)
- Nntp-Posting-Host: joseph.wpi.edu
- Organization: Worcester Polytechnic Institute, Worcester, MA 01609-2280
- Date: Wed, 29 Jul 1992 02:27:46 GMT
- Lines: 24
-
-
- *** I am posting this for jzp@gene.ummed.edu, please respond to him, since
- I know nothing about this stuff :-)
-
- Thanks,
- Mike.
-
- ================================================================
-
- I am in DIRE need of the hole-position-to-hole-number map for the
- DIN8 serial ports on the 4ds[30, to be specific].
- Yes, _man_serial_ gives me the pinout, but the port is not labeled
- and I cannot recall if the center-line of holes is `reversed' in
- its numbering or not.
-
- Please respond ASAP to jzp@gene.ummed.edu.
-
- Thank you,
- Joe Provo
-
- Disclaimer: "I'm the only one foolish enough to claim these opinions as mine."
- jzp@gene.ummed.edu jprovo@shunix.uucp jprovo@gnu.ai.mit.edu
- Russell Street UN*X Consultations and Development (NIC handle: JZP)
- Joe @ 90.5 FM in Worcester, MA Rev. Dkr. Nick LaRG0, ASC
-