home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!cs.utexas.edu!usc!sol.ctr.columbia.edu!caen!uakari.primate.wisc.edu!usenet.coe.montana.edu!news.u.washington.edu!carson.u.washington.edu!donn
- From: donn@carson.u.washington.edu (Donn Cave)
- Newsgroups: comp.sys.sequent
- Subject: Re: scsi this...
- Message-ID: <1992Jul27.201540.5639@u.washington.edu>
- Date: 27 Jul 92 20:15:40 GMT
- References: <22541@hacgate.SCG.HAC.COM>
- Sender: news@u.washington.edu (USENET News System)
- Distribution: usa
- Organization: University of Washington
- Lines: 61
-
- tony@hacgate.SCG.HAC.COM (Tony Reeves) writes:
-
- | We have a Sequent S81 running the sequent drive controllers running swallow,
- | super swallows and NEC drives.
-
- | We would like to use any standard scsi drives on our system. Is anyone using
- | standard scsi drives (like a Maxtor P1-17s?) on a sequent? If so can you use
- | any scsi drives? what controller do you use? can you format drives while in
- | multi-user mode?
-
- | any answers would be great.
-
- Good, because this answer probably won't be much help to you. We finally
- succeeded in attaching a 3rd party (DEC) SCSI disk drive to our Sequent
- 2000/750, just this last week, after much head-scratching and fumbling
- around. I'm going to try to summarize what we now know about it, since
- several people who were kind enough to respond to my previous inquiry on
- the subject expressed some interest. However, I believe that your S81
- doesn't have the hardware that's needed for this. Ours certainly doesn't.
-
- The SCSI-2 interfaces to our 2000 go through the QCIC controller(s). We
- have one such controller, with 4 ports; port 0 is already occupied with
- a "pbay" that drives two 1.2 MB Hewlett Packard SCSI disks. The pbay
- apparently performs some functions that are required by these drives, but
- that other vendors may incorporate into their drive boxes.
-
- We plugged our new disk directly into QCIC port 1. I can't explain the
- numbering system, but that makes the disk /dev/qd6.
-
- Of course we had to construct our own VTOC, using information supplied by
- the vendor, and when that appeared to be in error we had to write a program
- to investigate the disk (I believe we actually modified the mkvtoc program
- to find out how many cylinders were actually present). It turned out that
- our VTOC needed to account for one more cylinder than the vendor reports.
-
- Notes:
-
- 1. SCSI 2 interfaces: it turns out that there are two kinds of SCSI 2
- interfaces. "Open-ended", the kind that one generally sees on
- workstation systems like DECstations and RS/6000s, isn't capable
- of handling long cabling distances like the "differential" interface
- that Sequent supports on the 2000. The disk vendor may be able to
- supply a differential drive, if you ask.
-
- 2. Cables: our drives have a Centronix (wide) port, and the 2000's
- QCIC ports have a Honda (narrow) port. We had to arrange to have
- a special cable made - if you will need one, ask early, because it
- could take a while.
-
- 3. Support: Sequent will not be able to help you very effectively in
- attaching 3rd party disks.
-
- We will probably know more about this situation, collectively, when the
- man who did most of the work comes back from vacation, and if I can add
- anything to this I'll post it. The short answer seems to be that we now
- think that 3rd party SCSI 2 disk drives can be attached to a Sequent 2000
- system, but it's not like our other UNIX platforms, DECstations, RS/6000s,
- etc., where it's little more than a matter of plugging them in.
-
- Donn Cave, University Computing Services, University of Washington
- donn@cac.washington.edu
-