home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.next.hardware
- Path: sparky!uunet!wupost!sdd.hp.com!ux1.cso.uiuc.edu!lemson
- From: lemson@ux1.cso.uiuc.edu (David Lemson)
- Subject: Re: NeXT, MicroPhone II & ZyZel U1496E Modem?
- Message-ID: <Brq3zF.D7q@ux1.cso.uiuc.edu>
- Organization: University of Illinois at Urbana
- References: <55184@athertn.Atherton.COM> <1992Jul20.231818.15838@cs.rose-hulman.edu>
- Date: Tue, 21 Jul 1992 05:16:12 GMT
- Lines: 33
-
- bohlke@nextwork.Rose-Hulman.Edu (Jon H Bohlke) writes:
-
-
- >David,
- > My manual told me that I had to have hardware flow control for my ZyXel 14.4
- >v.42bis connection. Is that available on an 68030?
-
- >Jon
- >In article <55184@athertn.Atherton.COM> dlw@atherton.com (Remo Williams) writes:
- >> Just got my ZyZel U1496E (for $350 by the way) and plugged it into my NeXT (030
- >> cube) and cranked up Microphone II with the speed setting in Microphone set to
- >> its highest level (38xxx). I can connect up ok to the 2 systems I normally
- >> call.
- >>
- >> However trying to do a download of files with either
- >>
- >> On Unix, the sz command (on the remote unix host side)
- >> or WWIV macintosh bbs (zmodem download)
- >>
- >> simply generates transmission errors my side. I have made no settings
-
- The fastest I've gotten an 030 cube to do zmodem reliably (no
- errors) with IComm has been 9600 bps. Others have gotten 19.2 with
- few retries, but you can't be doing anything else at the same time.
- 38.4 is right out.
- (The 030 certainly does not support hardware flow control, as
- documented in about a hundred places, the least of which is the 'zs'
- man page)
- --
- David Lemson (217) 244-1205
- University of Illinois NeXT Campus Consultant / CCSO NeXT Lab System Admin
- Internet : lemson@uiuc.edu UUCP :...!uiucuxc!uiucux1!lemson
- NeXTMail accepted BITNET : LEMSON@UIUCVMD
-