home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.mac.system
- Path: sparky!uunet!centerline!noc.near.net!wpi.WPI.EDU!wpi.WPI.EDU!tefler
- From: tefler@wpi.WPI.EDU (Scott T Salvidio)
- Subject: Connecting modem to mac se/30
- Message-ID: <1992Jul21.205324.5241@wpi.WPI.EDU>
- Sender: news@wpi.WPI.EDU (USENET News System)
- Nntp-Posting-Host: wpi.wpi.edu
- Organization: Worcester Polytechnic Institute
- Date: Tue, 21 Jul 1992 20:53:24 GMT
- Lines: 8
-
- I'm trying to connect a modem that i've been using on my ibm to a mac
- that i bhave temporarily.. i tried using a converter from the mac modem
- port connection to a 25 pin female (which i then attached a female ->
- male converter to attach to the modem. as far as i can tell, the connection
- is fine.. but when i load up a program i got called miniterm, it doesn't
- seem to be sending anyting to the modem when i type in standard at commands..
-
- any suggestions would be appreciated..
-