home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.sys.mac.hardware:14246 comp.sys.ibm.pc.hardware:20360
- Newsgroups: comp.sys.mac.hardware,comp.sys.ibm.pc.hardware
- Path: sparky!uunet!munnari.oz.au!uniwa!DIALix!leigh
- From: leigh@DIALix.oz.au (Leigh Smith)
- Subject: Help required for Seagate ST-157N SCSI drive
- Organization: DIALix Services, Perth, Western Australia
- Date: Mon, 27 Jul 92 06:26:35 GMT
- Message-ID: <1992Jul27.062635.25711@DIALix.oz.au>
- Summary: Help required on Seagate ST-157N SCSI drive
- Keywords: ST157N, SCSI
- Lines: 26
-
-
- Hi All,
-
- I need couple of bits of knowledge about a Seagate ST-157N SCSI drive.
- Being in Australia, I'm trying to avoid calling the support line in
- the U.S. as someone is bound to know this already and local people
- can't and won't help.
-
- 1. Where are the terminating resistors for the SCSI bus located?
- It must be on the underside of the drives controller board,
- are they/it removable? There are three yellow ceramic resistor
- packs next to the 50-pin connector, but they don't look removable.
-
- 2. The 5 jumper links will obviously include three for SCSI device
- selection, but which are they, and how should they be jumpered to
- select a device number? What do the other two jumpers perform?
-
- Please reply by Email, thanks in advance.
-
- Leigh
- +-=======-=======-=======-=======-===========-=======-=======-=======-=======-+
- | Leigh Smith Preferred -> Home : leigh@psychok.DIALix.oz.au |
- | Perth, Western Australia Phone: +61-9-450-2014 |
- | Consulting to: Work : leigh@hp750.comsys.DIALix.oz.au |
- | Comsys International Phone: +61-9-389-8877, Fax: +61-9-386-3414 |
- +-=======-=======-=======-=======-===========-=======-=======-=======-=======-+
-