home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!spool.mu.edu!mixcom.com!craig.stodolenak
- From: craig.stodolenak@mixcom.mixcom.com (craig.stodolenak)
- Newsgroups: comp.sys.mac.hardware
- Subject: Re: SE/30 Internal Greyscale
- Message-ID: <1992Jul25.201853.3571@mixcom.com>
- Date: 25 Jul 92 20:18:53 GMT
- Article-I.D.: mixcom.1992Jul25.201853.3571
- References: <1992Jul24.144749.1492@uni2a.unige.ch> <1992Jul25.033117.9555@scott.skidmore.edu>
- Sender: uuvvuu@mixcom.com (Craig Stodolenak)
- Distribution: usa
- Organization: Milwaukee Internet Xchange BBS, Milwaukee, WI U.S.A.
- Lines: 22
-
- pwan@scott.skidmore.edu (peter wan) writes:
-
- >tamone@uni2a.unige.ch writes:
- >> To have grey-scale on a se/30 is there a need for a special external
- >> monitor...
-
- >Yes, and also the necessary video interface card.
-
- >> ...or the built-in one can do it ?
-
- >No. The on board video circuitry driving the 9 inch tube of the SE/30
- >supports black/white only.
-
- Actually, the video board from Micron (along with a special adaptor, also
- from Micron) will allow use of the internal monitor for 8-bit greyscale.
- This is the only hardware that I know of that will give you this
- capability.
-
- --
- Craig L. Stodolenak I-Net: archon@mixcom.com -- __o
- 6911 W. Mitchell St. Apt. 3 GEnie: C.STODOLENA3 -- _`\<,_
- West Allis, WI 53214-4840 P-Net: +1 414 453 1388 -- (_)/ (_)
-