home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.ps2.hardware
- Path: sparky!uunet!gatech!usenet.ins.cwru.edu!agate!linus!linus.mitre.org!jcmorris
- From: jcmorris@mwunix.mitre.org (Joe Morris)
- Subject: Re: High Rate of Mother Board Failures - Why?
- Message-ID: <jcmorris.712500537@mwunix>
- Sender: news@linus.mitre.org (News Service)
- Nntp-Posting-Host: mwunix.mitre.org
- Organization: The MITRE Corporation
- References: <1992Jul29.150737.35@vtrm01.uucp>
- Date: Thu, 30 Jul 1992 12:48:57 GMT
- Lines: 41
-
- flaforest@vtrm01.uucp (Fred LaForest) writes:
-
- >High rate of motherboard failures on PS/2 MOD50, 50z, 55sx, and 60.
- >Problem usually starts with intermittent floppy drive errors. Floppy
- >is replaced, problem still exists, motherboard is replaced, problem
- >is resolved. Has anyone out there had a similar type problem and
- >what resolutions were put in place?
-
- With several thousand desktop systems of various flavors (including a lot
- of PS/2's) here I haven't seen any particularly visible number of such
- motherboard failures. Given the popularity of IBM-bashing on usenet I
- would have expected that if other shops had seen a lot of these systems
- failing we would see postings to that effect.
-
- Off-the-wall suggestion for the techs who are having this problem: check
- the AC power the PC's are plugged into. Even with over thirty years
- of engineering experience I continue to be amazed at the electronic filth
- one finds coming out of a power outlet. Especially in older buildings
- (especially those originally built more than 20 years or so ago) there
- are numerous ways that the nice sinusoidal waveform at the AC generator
- can become contaminated. Older buildings, designed before electronic
- equipment became common in offices, just don't have the wiring architecture
- that is necessary to keep the power clean.
-
- And it's sometimes the computer equipment itself which is to blame. If
- you really want to see some pure garbage on a power line, get a power
- analyzer (such as the monitors built by Dranitz) and watch what happens
- when a LaserJet II is running. Every time the idle timer jogs the drum
- it puts a tremendous spike back into the AC power wiring.
-
- Or do an inventory of what equipment is plugged into the same AC branch
- circuit as the computer. There seems to be some natural law which says
- that users will always use the wires serving the computer to also provide
- power to coffee pots and space heaters. Especially if the computer outlet
- is clearly marked "for computer equipment only".
-
- It might be a good idea to call your local electric utility company. Many
- of them have engineers on the staff who will assist you in resolving problems
- caused by the AC power circuits.
-
- Joe Morris / MITRE
-