home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.ps2.hardware
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!destroyer!news.iastate.edu!isucard.card.iastate.edu!MLONG
- From: MLONG@isucard.card.iastate.edu
- Subject: Re: EMS driver for Mod 50/60 mem expansion
- Message-ID: <1682D13F79.MLONG@isucard.card.iastate.edu>
- Sender: news@news.iastate.edu (USENET News System)
- Organization: CARD
- References: <1992Jul23.120305.24057@einoed.in-berlin.de>
- Date: Fri, 24 Jul 1992 04:43:01 GMT
- Lines: 28
-
- In article <1992Jul23.120305.24057@einoed.in-berlin.de>
- alh@einoed.in-berlin.de (Adrian Le Hanne) writes:
-
- >Hi,
- >i asked this before but got no answer so here it is again.
- >I have a Modell 60 with the IBM memory expansion card and need the EMS
- >driver software for this card. Could someone tell me, where i can get this?
- >IBM here in germany only tells me to go to a dealer and i haven't found
- >one who has some technical knowledge, yet. :-(
- >
- >thank you,
- >Adrian
- >--
- >Adrian S. Le Hanne Einoed Unix & Netzwerke, Koepenicker Str.154, D-1000
- >alh@einoed.in-berlin.de Berlin 36. Tel.: 030/611 31 26, Fax.: 030/826 98 75
- > "Christianity Is Stupid" -Negativland
- >
- Call the IBM NSC BBS at 404-835-6600 and download the latest CSD for IBM DOS
- 4.0. On that set of disks is a file called XMA2EMS.SYS that is the file
- you need, and is also the latest version. This file can also be used with
- IBM DOS 5.0 HIMEM.SYS, but you will need to put the XMA2EMS.SYS driver before
- the HIMEM.SYS driver. If you need the option switches for XMA2EMS.SYS please
- repost for help after you have gotten the file.
- I see you are international, hopefully you can get this file without too long
- of a phone call.
- Sorry if this messes up your news reader :->
- Mike Long
- Iowa State University
-