home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.pc.hardware
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!caen!hellgate.utah.edu!fcom.cc.utah.edu!u.cc.utah.edu!ccs
- From: ccs@u.cc.utah.edu (Charles Storer)
- Subject: Re: Looking for device driver for SCSI Bournouli drive
- Message-ID: <1992Jul27.163141.29320@fcom.cc.utah.edu>
- Sender: news@fcom.cc.utah.edu
- Organization: University of Utah Computer Center
- References: <1992Jul25.214648.15617@wpi.WPI.EDU> <1992Jul26.032601.18887@zeos.com>
- Date: Mon, 27 Jul 92 16:31:41 GMT
- Lines: 21
-
- In article <1992Jul26.032601.18887@zeos.com> kgermann@zeos.com (Ken Germann) writes:
- >In article <1992Jul25.214648.15617@wpi.WPI.EDU> wedgerat@wpi.WPI.EDU (Erik Swimm) writes:
- >>
- >> I managed to pick up a couple of Bournouli drives, and SCSI controller cards,
- >>but have no idea how to set them up, nor the software with which to do it. The
- >>drives are OMEGA drives, model BETA-20H, and use 20Mb disks. If anyone could
- >>direct to to an appropriate place to find the drivers, and perhaps a little
- >>setup advice, I'd appreciate it.
- >>
- >The drivers for the drive are dependant on which SCSI controller you are
- >using. An adaptec controller would use the ASPI4DOS.SYS in your config.sys
- >to allow you to access the Bernoulli.
- >
- >
- >
-
- Information on Iomega drivers, and on compatibility of Iomega's
- Bernoulli drives with various SCSI controllers, is available from
- info@iomega.com. An email message to that address which says "help" or
- "send index" will get you more details.
-
-