home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!zephyr.ens.tek.com!uw-beaver!micro-heart-of-gold.mit.edu!news.bbn.com!noc.near.net!wpi.WPI.EDU!wpi.WPI.EDU!wedgerat
- From: wedgerat@wpi.WPI.EDU (Erik Swimm)
- Newsgroups: comp.sys.ibm.pc.hardware
- Subject: Re: Looking for device driver for SCSI Bournouli drive
- Message-ID: <1992Jul26.151310.4026@wpi.WPI.EDU>
- Date: 26 Jul 92 15:13:10 GMT
- References: <1992Jul25.214648.15617@wpi.WPI.EDU> <1992Jul26.032601.18887@zeos.com>
- Sender: news@wpi.WPI.EDU (USENET News System)
- Organization: Worcester Polytechnic Institute
- Lines: 13
- Nntp-Posting-Host: wpi.wpi.edu
-
- In article <1992Jul26.032601.18887@zeos.com> kgermann@zeos.com (Ken Germann) writes:
-
- >The drivers for the drive are dependant on which SCSI controller you are
- >using. An adaptec controller would use the ASPI4DOS.SYS in your config.sys
- >to allow you to access the Bernouli.
-
- The cards look like they are specific to the IOEMGA drive. They have 2
- connectors, one marked SCSI and one ANALOG. The one marked analog seems to
- go to the drive, so I assume the SCSI slot is just to make the card more
- multi-purpose. I'm going to give IOMEGA a call on Monday, and see if I can
- get the software that I need to use the drive.
-
- -Erik A, Swimm
-