home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.hp
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!news.acns.nwu.edu!casbah.acns.nwu.edu!fchen
- From: fchen@casbah.acns.nwu.edu (FuGwo Chen)
- Subject: Help! HP3000 MPV, HP9000 UX, Novell 3.11 and NCSA anyone?
- Message-ID: <1992Jul29.231528.22756@news.acns.nwu.edu>
- Followup-To: fu-gwo@nwu.edu
- Keywords: HP3000, HP9000, Novell 3.11
- Sender: Fu-Gwo Chen
- Organization: Northwestern University, Evanston Illinois.
- Date: Wed, 29 Jul 1992 23:15:28 GMT
- Lines: 70
-
- Hi, NETTER:
- Sorry about cross posting to 2 group. But I need the answer bad.
-
- Here are the question and hop some people can give me some more idea.
-
- University Backbone
- --------------------------------------------
- |
- ----------
- |repeater|
- ----------
- | Kellogg Backbone
- ----------------------------------------------------------------
- | | | | |
- HP3000 HP9000 NW 3.11 server PCs HP ET HUB
- | | | | | |
- P P P P P P
- C C C C C C
- (Diskless Computer Lab)
-
- Hope this give you some general idea what our system look like. HP 3000 is
- running MPE/V with HP Network Service and Wollongong loaded. HP9000 is
- running HP UX. All the PC in the LAB are using HP EtherTwist 16 bit board.
- PCs on the Kellogg Backbone is either using 3C501 or using 16 bit board. I
- have try both and the result is the same.
-
- What I would like to accomplished is to:
- 1) Let the PC in the LAB to be able to login to Novell System (easy part);
- 2) With the ability to telnet to HP9000 or UNIX machine on the University
- Backbone. I think I can use the packet driver and NCSA-Telnet to do so;
- (not difficult);
- 3) With the ability to connect to HP3000 with TCP/IP or anything that will
- run the terminal emulation program for HP system (Reflection from WRQ).
- CONFUSING! (still not difficult).
- But when I want everything join together. All hell broke lose. I don't know
- the clean solution.
-
- Option:
- NCSA: I can use it for telnet to UNIX box with packet driver. WRQ said
- as long as it is int-14 compatible. I think it is but no sure.
- Therefor, I can not get it working with Reflection to talk to
- HP3000.
-
- HP: Their answer is have Network Service on the HP3000 and PC. I got it
- work to connect to HP3000 and using Reflection. But how can I telnet
- to other UNIX box.
-
- WRQ: They provide another product call 3000 connection using NDIS driver.
- I think it use the Wollongong TCP/IP. (Not 100% sure) I can get on the
- HP3000 as a student and use the student menu. But from time to time
- the refreshing of the screen is estrum low. Like 3 minutes per screen.
- When I check the HP3000 all direct connection is working fine. Doesn't
- indicate there is any problem on the network traffic unless I miss
- anything? Using the same software to connect to the UNIX box all the
- message got scrambled.
-
- Question 1: Does anyone connecting to the HP3000 going through Novell.
- Question 2: Does anyone have the similar system that we got?
- Question 3: If not, any suggestion?
- Question 4: If yes, how do you do it?
-
- Response will be greatly appreciated. Just imaging I got 3 lab need to setup
- before the end of August pending on whether I can get the answer of this
- one. Thanks for you time (even just reading thorough).
-
- --
- Fu-Gwo Chen | The old believe everything; |
- Northwestern University -KGSM | the middle-age suspect everything; |
- 708-491-2870 | the young know everything. |
- fu-gwo@nwu.edu | -- from fortune cookie |
-