home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!usc!rpi!bu.edu!dartvax!tutor!poverty!pete
- From: pete@poverty.UUCP (Peter Schmitt)
- Newsgroups: comp.sys.att
- Subject: Booting errors on 3B2/400
- Message-ID: <712432060snx@poverty.UUCP>
- Date: 29 Jul 92 17:47:40 GMT
- Reply-To: Peter.Schmitt@Dartmouth.EDU
- Organization: Poverty Lane
- Lines: 47
-
- Can some decifer this output for me?
- I get the following output when turning on the 3B2:
-
- FW ERROR 1-01: NVRAM SANITY FAILURE
- DEFAULT VALUES ASSUMED
- IF REPEATED, CHECK THE BATTERY
-
- FW ERROR 1-01: NVRAM SANITY FAILURE
- DEFAULT VALUES ASSUMED
- IF REPEATED, CHECK THE BATTERY
- UNKNOWN ID CODE 0x100 FOR DEVICE IN SLOT 2
- EQUIPPED DEVICE TABLE COMPLETION WILL CONTINUE.
- CHECK EDT.
-
- DIAGNOSTICS PASSED
-
- Driver not found for *VOID* device (board slot 2)
-
- UNIX System V Release 3.1 AT&T 3B2 Version 2
- Node unix
- Total real memory = 2097152
- Available memory = 1357824
-
- *************************************************************************
-
- Copyright (c) 1984 AT&T - All Rights Reserved
-
- THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF AT&T INC.
- The copyright notice above does not evidence and actual or
- intended publication of such source code.
-
- *************************************************************************
-
-
- That's all that is output. I think I'm expecting a Console login prompt.
- But it just freezes right there. Do I need a battery? Is there a way
- to reenergize the one installed?
-
- -pete
- ============================================================================
- Peter Schmitt Email: pete@poverty.UUCP
- 209 Poverty Lane Home: (603)448-5727
- Lebanon, NH 03766 Work: (603)646-2085
- ----------------------------------------------------------------------------
- ****** Let us not give up meeting together, as some are in the habit *******
- ****** of doing, but let us encourage one another. -Hebrews 10:25 *******
- ============================================================================
-