home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.atari.st
- Path: sparky!uunet!usc!cs.utexas.edu!torn!watserv1!bmaraldo
- From: bmaraldo@watserv1.uwaterloo.ca (Commander Brett Maraldo)
- Subject: Adaptec Controller Clock Problem
- Message-ID: <Bs7wE5.62p@watserv1.uwaterloo.ca>
- Organization: Unit 36 Research
- Date: Thu, 30 Jul 1992 19:49:15 GMT
- Lines: 22
-
-
- I just purchased an ICD drive with an Adaptec 4000 series front-end
- SCSI board. It has the real-time clock on it. It came with a set of old
- ICD utilities that wouldn't allow for >16M partitions. So, I used the new
- Atari utils. When I run the ICDTIME.PRG or TIMESET.PRG I get 2 bombs. I
- can't seem to access the clock properly. Do you know why this is and how
- i might be able to get to the clock? Perhaps the old ICD utils are not
- compatible with the new Atari utils I used to format it (???).
- Also, the manual that came with this vintage 1987 drive state that
- the COPYFIX.PRG program should be in the \AUTO folder to fix the TOS bug
- that doesn't update the time on copied files. Was this fixed in TOS1.4 (ie.
- do I need it)?
-
- Thanks for your help,
-
- Brett Maraldo
-
- --
- -------- Unit 36 Research ---------
- "Alien Technology Today"
- bmaraldo@watserv1.UWaterloo.ca
- {uunet!clyde!utai}!watserv1!bmaraldo
-