home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.atari.8bit
- Path: sparky!uunet!darwin.sura.net!convex!constellation!alliant.backbone.uoknor.edu!nlin
- From: nlin@alliant.backbone.uoknor.edu (Norman Lin)
- Subject: Touch Tablet: need pinouts!
- Message-ID: <1992Jul28.042720.8963@constellation.ecn.uoknor.edu>
- Sender: usenet@constellation.ecn.uoknor.edu (Nets)
- Organization: University of Oklahoma, Norman, OK
- Date: Tue, 28 Jul 1992 04:27:20 GMT
- Lines: 17
-
- After hitting a garage sale and misc.forsale, I have assembled myself a(nother)
- small working Atari system; Atari 400 + cassette drive + miscellaneous
- hardware. Among this miscellaneous hardware is an Atari Touch Tablet.
- I'd like to try to use it with my "AtariArtist" cartridge, but unfortunately
- the connector (that goes into the joystick port) for the touch tablet has
- been ripped apart, leaving only wires. Reassembling the connector would be
- easy if I knew which wires go to which pins.
-
- So does anyone know which wires (i.e. purple goes to pin 5, white goes to pin
- 9, etc.) go to which pins on the Atari Touch Tablet? Any help would be
- greatly appreciated!
-
- Thanks,
-
- Norman Lin
- norlin@uokmax.ecn.uoknor.edu / norlin@129.15.20.2 (preferred)
- nlin@alliant.backbone.uoknor.edu (alternate)
-