home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.hardware
- Path: sparky!uunet!sun-barr!ames!agate!linus!linus.mitre.org!leland
- From: leland@mitre.org (Robert Leland)
- Subject: 1 Meg Upgrade, Problems
- Message-ID: <1992Jul27.115357.25678@linus.mitre.org>
- Sender: news@linus.mitre.org (News Service)
- Nntp-Posting-Host: otto.mitre.org
- Organization: The MITRE Corporation, McLean, VA, USA
- Date: Mon, 27 Jul 1992 11:53:57 GMT
- Lines: 23
-
- I receintly tried to up grade to 1 Meg Chip, I have a Rev 5 mother board
- and a A501 Expansion memory. When installed the 1 Meg Agnus the screen
- was not being properly updated. When I resized windows parts were left behind.
- I tried:
- Reseating the chip, several times.
- Replacing the chip with another 1 Meg Agnus.
- Replacing the Gary chip.
- There is no change. The above occurs with and without a hard drive and
- all the extras attached.
-
- When I reinstall my 512K my machine works just fine, (After undoing the changes!)
-
-
- Any suggestions??
- --
- ______________________________________________________________________________________
- Robert Leland | Views expressed are my own.| _ _ _
- PSI - W302 | OO-What a beautiful mornin'| \_!_/ PSI
- 7525 Colshire Drive| (703)883-7129 (Voice) USA | | in support of
- McLean, VA 22102 | (703)883-6308 (Fax) USA | _|_ MITRE
-
-
-
-