home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1992 #16 / NN_1992_16.iso / spool / comp / sys / amiga / hardware / 13121 < prev    next >
Encoding:
Internet Message Format  |  1992-07-23  |  2.2 KB

  1. Xref: sparky comp.sys.amiga.hardware:13121 comp.sys.amiga.applications:6155
  2. Newsgroups: comp.sys.amiga.hardware,comp.sys.amiga.applications
  3. Path: sparky!uunet!sun-barr!cs.utexas.edu!usc!sol.ctr.columbia.edu!The-Star.honeywell.com!umn.edu!noc.msc.net!ns!ns!guy
  4. From: guy@ns.network.com (Guy D'Andrea)
  5. Subject: Re: Problem with Amiback 2.0
  6. Message-ID: <1992Jul23.131811.268@ns.network.com>
  7. Sender: news@ns.network.com
  8. Nntp-Posting-Host: ns
  9. Organization: Network Systems Corporation
  10. References: <058H02l01bKM01@JUTS.ccc.amdahl.com>
  11. Distribution: usa
  12. Date: Thu, 23 Jul 92 13:18:11 GMT
  13. Lines: 36
  14.  
  15. In article <058H02l01bKM01@JUTS.ccc.amdahl.com> asl00@juts.ccc.amdahl.com (Andrew S. Lee) writes:
  16. >I've recently run into a problem and need some help.
  17. >My hardware configuration is as follows:
  18. >
  19. >Amiga 2000 (5MB)
  20. >A2091 controller
  21. >105S Quantum prodrive
  22. >40S Quantum prodrive
  23. >Archive Viper 2150s
  24. >
  25. >I'm running Amibcak 2.0c and am having lots of trouble finishing a 
  26. >complete, or full, backup.  What happens is that the controller will
  27. >go into a solid lock, with the activity light on continuously, during
  28. >a backup operation.  I've rerun the backups many times with the controller
  29. >hosed up at different points each time.  The rest of the system is fine
  30. >but anything requiring going to the hard drive just hangs.  
  31. >
  32. >I've checked all connections and terminators and they all seem fine.
  33. >Bad tapes don't seem to be the problem as I tried many different ones
  34. >and still haven't had any success.  The only thing I've done recently
  35. >is to replace my internal floppy with a new one.  I'm starting to suspect
  36. >my controller or tape drive as the culprit.  Any suggestions would be
  37. >highly apprecieated.  Thanks.
  38. >
  39. >Andrew Lee    <asl00@juts.ccc.amdahl.com> (408)746-8561
  40. >----------------------------------------------------------------------------
  41. It might be you need to turn re-selection off.  My GVP controller comes with
  42. software to do this.  Also, try BTNTape 2.1 and see if that works Ok.  I have
  43. the same tape drive and a GVP series II type controller and have used GVP's
  44. TapeStore, QuarterBack, AmiBack and BTNTape successfully...
  45.  
  46. -Guy
  47.  
  48.  guy@nsco.network.com, Guy Dandrea, Network Systems Corp., Mpls. MN 55428,  USA 
  49.                         1-800-328-9108  Fax:(612)424-1736 
  50.  
  51.