home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!usc!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!ames!agate!overload.lbl.gov!lll-winken!vaxb.llnl.gov!yurick
- From: yurick@vaxb.llnl.gov
- Newsgroups: comp.sys.amiga.hardware
- Subject: HELP! 1 MEG agnus update=blank screen
- Message-ID: <1992Jul21.180822.1@vaxb.llnl.gov>
- Date: 22 Jul 92 01:08:22 GMT
- Sender: usenet@lll-winken.LLNL.GOV
- Organization: LLNL_LIS
- Lines: 21
- Nntp-Posting-Host: vaxb.llnl.gov
-
- Hello all,
- Today I removed my 1/2 meg Agnus chip, replaced it with the 1 meg chip
- (8372A), changed J101 to short out the first and middle post (rather than the
- middle and 3rd post), and opened J500. I put everything back together, turned
- on my machine...and saw a BLANK WHITE SCREEN!!??
-
- Here's my set up:
- A2000, 4.5 Megs of fast ram, ???Meg of chip ram, rev 4.2 mother board, A2090
- SCSI HD controller, 20 Meg miniscribe HD, MultiStartII (with 1.3 & 2.0 ROMS),
- external floppy drive (that wasn't hooked up during the test).
-
- What happened, and what can I do to fix it??? Any information would help out
- greatly!!!!
-
- Joe
- --
- *****************************************************************************
- * Joe Yurick California U.S.A. E-Mail : yurick@vaxr.llnl.gov *
- *** My thoughts & views are rarely my own, much less that of my employer! ***
- *****************************************************************************
- I think, therefore I am...an Amiga owner!
-