home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1992 #16 / NN_1992_16.iso / spool / comp / sys / 3b1 / 2913 < prev    next >
Encoding:
Internet Message Format  |  1992-07-20  |  3.0 KB

  1. Path: sparky!uunet!beartrk!ceilidh!hijo-2!dnichols
  2. From: dnichols@ceilidh.beartrack.com (Don Nichols (DoN.))
  3. Newsgroups: comp.sys.3b1
  4. Subject: Re: Hooking up Radio Schack Fan?
  5. Message-ID: <1992Jul21.001135.1287@ceilidh.beartrack.com>
  6. Date: 21 Jul 92 00:11:35 GMT
  7. References: <1992Jul20.052424.1634@iitmax.iit.edu>
  8. Distribution: na
  9. Organization: D and D Data, Vienna Virginia
  10. Lines: 52
  11.  
  12. In article <1992Jul20.052424.1634@iitmax.iit.edu> thsskac@iitmax.iit.edu (Kevin A. Chin) writes:
  13. >
  14. >
  15. >I am in the process of installing my new Radio Shack fan,
  16. >but I wanted to know what was the best way to hook up the
  17. >power lines?
  18. >
  19. >1) Should I solder the two wires to the two power nodes on
  20. >    the inside by the black "fuse box"?
  21.  
  22.     I haven't yet needed to replace my fans, but what I would *prefer* to
  23. do is to crimp connectors on the fan wires such as I have seen before.  They
  24. contain a socket to press onto the existing tab, and present another tab
  25. adjacent to it to accept the press-on connectors from the power supply.  I
  26. intend to keep my eyes open for such connectors at hamfests and similar
  27. places.
  28.  
  29.     Lacking that, I would strip about 1/2" to 3/4" of insulation from
  30. the end of each wire, tin the wires (flow solder into them, so they
  31. effectively become a solid conductor when cool), wrap each wire fully around
  32. the each tab on the switch/fuse-holder assembly *at the base*, and flow the
  33. solder into this joint, with the position of the tabs such that solder does
  34. not run down to the ends.  (The excess solder would make the press-on
  35. connectors for the power supply difficult to get on and off.
  36.  
  37. >2) Should I splice the two wires to a regular power cord and then
  38. >    just plug that into an outlet?
  39.  
  40.     The only benefit that I could see to this arrangement would be that
  41. you could run the fans for a while after powering down the computer, to cool
  42. off the interior more quickly.  Since the system should normally be left
  43. powered up in the absence of adverse conditions such as thunderstorms
  44. playing outside the window, or smoke exiting the box :-), this would be a
  45. minimal benefit for the additional inconvenience of having to find another
  46. power outlet for the fan, and having to live with a permanent power cord to
  47. the fan(s) when moving the system, unless you took the time to mount a
  48. separate jack for the additional power cord while modifying the system.
  49.  
  50.     You could mount the new fans on a cradle for the cpu-box, which
  51. would hold them against the existing ventilation openings, in which case
  52. having an extra power cord for them would make sense.  They could also be
  53. inspected for excess dust buildup more easily, and replaced easily in the
  54. unlikely event of failure.  The negative tradeoff here would be reduced
  55. access to the connectors on the back of the computer.
  56.  
  57.     Good Luck
  58.         DoN.
  59. -- 
  60. Donald Nichols (DoN.)     | Voice (Days): (703) 704-2280 (Eves): (703) 938-4564
  61. D&D Data                  |  Email: <dnichols@ceilidh.beartrack.com>
  62. I said it - no one else   |         <dnichols@ceilidh.aes.com>
  63.     --- Black Holes are where God is dividing by zero ---
  64.