home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1992 #16 / NN_1992_16.iso / spool / comp / protocol / tcpip / 3914 < prev    next >
Encoding:
Internet Message Format  |  1992-07-30  |  1.2 KB

  1. Path: sparky!uunet!gatech!news.byu.edu!yvax.byu.edu!cunyvm!pvjqc
  2. Newsgroups: comp.protocols.tcp-ip
  3. Subject: Using SLIP on Sparcstn
  4. Message-ID: <92212.092850PVJQC@CUNYVM.BITNET>
  5. From: <PVJQC@CUNYVM.BITNET>
  6. Date: Thursday, 30 Jul 1992 09:28:50 EDT
  7. Organization: City University of New York/ University Computer Center
  8. Lines: 15
  9.  
  10. I recently downloaded `slipware' from one of the archives.  It includes
  11. Slip for different Sun OS releases, tip with slip option, and some patches.
  12. I was able to configure Slip as per the instructions for Sun Sparcstn2
  13. running 4.1.1 but do not have any further info. on making proper use of it.
  14. I basically have a `sliplogin' program which has a syntax of
  15. `sliplogin <dest. addr> <local Addr>' .  I understand that Slip is
  16. meant for point to point communication over serial lines.  I am not
  17. sure how I exactly use this?  What I wish to do is to configure this Sparc2
  18. for dial-in on /dev/ttya with slip, and then to configure other Suns, PCs
  19. at remote sites (like faculty homes) for dialing out using slip so
  20. that telnet/ftp would be possible from the home PCs (running CUTCP), and
  21. Suns to the Sparc2 in the Dept.
  22. Any suggestions or any documentation you can refer me to?
  23. Thanks a lot.
  24. Prashant Joshi
  25.