home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!dtix!darwin.sura.net!utkcs2!ornl!ORNL.GOV!de5
- From: de5@ORNL.GOV (Dave Sill)
- Newsgroups: comp.protocols.appletalk
- Subject: Appletalk novice needs help installing CAP
- Message-ID: <1992Jul29.152103.16385@ornl.gov>
- Date: 29 Jul 92 15:21:03 GMT
- Sender: usenet@ornl.gov (News poster)
- Organization: Oak Ridge National Laboratory
- Lines: 23
-
- I recently asked if CAP would let Ethernetted Macs print through our Suns.
- Thanks to everyone who replied.
-
- I went ahead and built/installed CAP, but I'm having trouble configuring and
- running it.
-
- After the "make install" I read the etc/start-cap-servers and
- support/ethertalk/README files and tried to run aarpd. Following the examples, I
- did:
-
- # /usr/local/cap/aarpd le0 ornl-ARM
- Zone "ornl-ARM" unknown, network default is " MMES ATalk Ph.2 default"
-
- (I pulled ornl-ARM out of thin air...there's no Appletalk network in this
- building, and it's appropriate.) So aarpd won't run. Do I need to contact the
- local Appletalk people and get an "official" zone? Anything else I should do?
- Any advice for an Appletalk ignoramus trying to install CAP would be greatly
- appreciated.
-
- --
- Dave Sill (de5@ornl.gov) For every Bill Joy there is a Kirk McKusick.
- Martin Marietta Energy Systems For every Bill Gates there is a Richard
- Workstation Support Stallman. --Paul Graham
-