home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!usc!wupost!darwin.sura.net!mips!zaphod.mps.ohio-state.edu!cis.ohio-state.edu!ucbvax!chem.wayne.edu!rlw
- From: rlw@chem.wayne.edu (Ron Wilson)
- Newsgroups: comp.protocols.appletalk
- Subject: atalkad and Fastpath 4 configuration problem
- Message-ID: <9207272143.AA21435@fourcroy.chem.wayne.edu>
- Date: 27 Jul 92 21:43:07 GMT
- Sender: daemon@ucbvax.BERKELEY.EDU
- Distribution: world
- Organization: The Internet
- Lines: 123
-
- We have just moved one of our file servers to our EtherTalk zone. However,
- only some of the LocalTalk zones can "see" it.
-
- After "snooping" with the "FastPath Manger" program, I discovered that my
- predecessor had configured the Phase I zone name on some, but not others.
- The ones with the Phase I EtherTalk zone name configured allow their
- LocalTalk client nodes to see the file server in the ET zone. The ones
- without, do not.
-
- The FastPath 4 manual says to configure only the Phase II, and KIP node and
- admin host information when using atalkad to supply the network configuration.
-
- I am finding that I have to also configure the Phase I ET zone name in order
- to allow LocalTalk stations to access services in the ET zone.
-
- We have 6 FastPath $ with PROM version 4.1, running K-STAR 8.1.1.
-
- Our atalkad is KIP rev 0688.
-
- Attached is a copy of our /etc/atalkatab file.
-
- Any ideas or suggest will be greatly appreciated.
-
- Thanks in advance.
-
- Ron Wilson, Network Admin, Wayne State Univ Chem Dept, rlw@chem.wayne.edu
-
- #
- #ident "@(#)atalkatab 1.6 91/10/27 khb"
- #
- # ATALKAD Configuration for WSU Chemistry Network
- #
- #
- # AppleTalk net FP FP IP managed
- # no. name type loc Address IP range
- # ===================================================================
- # 1 IP Ethernet, AT-IP *.26.0
- # 2 ET EtherTalk *.27.0
- #
- # 11 WB LocalTalk WB *.26.201 *.28.10
- # 21 W12 LocalTalk W1 *.26.203 *.28.90
- # 41 W34 LocalTalk W3 *.26.205 *.28.170
- #
- # 12 EB LocalTalk EB *.26.202 *.28.50
- # 22 E12 LocalTalk E1 *.26.204 *.28.130
- # 42 E34 LocalTalk E3 *.26.206 *.28.210
- #
- # 44 APS-Zone LocalTalk (E3)
- #
- #
- # Ethernet back bone
- 1 N1 141.217.26.0 ChemNet-IP #Ethernet, appletalk-in-IP
- #
- #
- # FastPath-1, WB, rebroadcast
- 2 E 141.217.26.201 ChemNet-ET #Ethertalk port
- 11 KC 141.217.26.201 ChemNet-WB #Localtalk port, rebroadcast
- I141.217.26.255 I141.217.26.2 #ipbroad ipname
- I141.217.26.2 I141.217.26.2 #ipdebug ipfile
- I141.217.28.10 L0 L0 L0 %n S200 #ipother atnetet(E) ddprangestart
- L0 S2 S36 #flags ipstatic ipdynamic
- %n %n #atneta(K) atnete(N)
- #
- #
- #
- #
- # FastPath-2, EB, rebroadcast
- 2 E 141.217.26.202 ChemNet-ET #Ethertalk port
- 12 KC 141.217.26.202 ChemNet-EB #Localtalk port
- I141.217.26.255 I141.217.26.2 #ipbroad ipname
- I141.217.26.2 I141.217.26.2 #ipdebug ipfile
- I141.217.28.50 L0 L0 L0 %n S200 #ipother atnetet ddprangestart
- L0 S2 S36 #flags ipstatic ipdynamic
- %n %n #atneta atnete
- #
- #
- #
- #
- # FastPath-3, W1
- 2 E 141.217.26.203 ChemNet-ET #Ethertalk port
- 21 KC 141.217.26.203 ChemNet-W12 #Localtalk port
- I141.217.26.255 I141.217.26.2 #ipbroad ipname
- I141.217.26.2 I141.217.26.2 #ipdebug ipfile
- I141.217.28.90 L0 L0 L0 %n S200 #ipother atnetet ddprangestart
- L0 S2 S36 #flags ipstatic ipdynamic
- %n %n #atneta atnete
- #
- #
- #
- #
- # FastPath-4, E1
- 2 E 141.217.26.204 ChemNet-ET #Ethertalk port
- 22 KC 141.217.26.204 ChemNet-E12 #Localtalk port
- I141.217.26.255 I141.217.26.2 #ipbroad ipname
- I141.217.26.2 I141.217.26.2 #ipdebug ipfile
- I141.217.28.130 L0 L0 L0 %n S200 #ipother atnetet ddprangestart
- L0 S2 S36 #flags ipstatic ipdynamic
- %n %n #atneta atnete
- #
- #
- #
- #
- # FastPath-5, W3
- 2 E 141.217.26.205 ChemNet-ET #Ethertalk port
- 41 KC 141.217.26.205 ChemNet-W34 #Localtalk port
- I141.217.26.255 I141.217.26.2 #ipbroad ipname
- I141.217.26.2 I141.217.26.2 #ipdebug ipfile
- I141.217.28.170 L0 L0 L0 %n S200 #ipother atnetet ddprangestart
- L0 S2 S36 #flags ipstatic ipdynamic
- %n %n #atneta atnete
- #
- #
- #
- #
- # FastPath-6, E3
- 2 E 141.217.26.206 ChemNet-ET #Ethertalk port
- 42 KC 141.217.26.206 ChemNet-E34 #Localtalk port
- I141.217.26.255 I141.217.26.2 #ipbroad ipname
- I141.217.26.2 I141.217.26.2 #ipdebug ipfile
- I141.217.28.210 L0 L0 L0 %n S200 #ipother atnetet ddprangestart
- L0 S2 S36 #flags ipstatic ipdynamic
- %n %n #atneta atnete
- 44 K 141.217.26.206 APS-Zone #atnet also on FP-6
-