home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1992 #16 / NN_1992_16.iso / spool / comp / os / os2 / misc / 25492 < prev    next >
Encoding:
Text File  |  1992-07-25  |  2.3 KB  |  36 lines

  1. Newsgroups: comp.os.os2.misc
  2. Path: sparky!uunet!wupost!gumby!destroyer!news.iastate.edu!isucard.card.iastate.edu!MLONG
  3. From: MLONG@isucard.card.iastate.edu
  4. Subject: How to make a Sony CD-ROM work with OS/2
  5. Message-ID: <1682E11C4F.MLONG@isucard.card.iastate.edu>
  6. Sender: news@news.iastate.edu (USENET News System)
  7. Organization: CARD
  8. Date: Sat, 25 Jul 1992 02:13:03 GMT
  9. Lines: 25
  10.  
  11. From the IBM OS/2 BBS:                                                          
  12.                                                                                 
  13.                                                                                 
  14.  ---------------------------------------------------- Level 5 of 5 Panel 1 of 1 
  15.  ----- OS2HW CFORUM appended at 22:43:24 on 92/07/17 GMT (by KENIN at MARTLINK) 
  16.  Subject: Sony CD-ROM CDU535...HELP!!                                           
  17.  Ref: Append at 15:43:45 on 92/07/10 GMT (by MTRA165 at OS2CUST)                
  18.                                                                                 
  19.  I have a SONY CD that is working fine.  The process is not supported by IBM.   
  20.                                                                                 
  21.  1) Install the CD support on the Selective Install screen.                     
  22.  2) I have a ADAPTEC SCSI card that is supported by OS2.                        
  23.    Look for the BASEDEV=AHA154X.ADD for the 1542 card in your CONFIG.SYS,       
  24.    if it is there (or one like it) you are OK here.                             
  25.  3) Make sure the following were added to your CONFIG.SYS by the install:       
  26.    IFS=D:\OS2\CDFS.IFS /Q                                                       
  27.    DEVICE=D:\OS2\CDROM.SYS /Q /I /N:4                                           
  28.    DEVICE=D:\OS2\MDOS\VCDROM.SYS                                                
  29.  4) Reboot and give it a try.                                                   
  30.                                                                                 
  31.   The /I parm is the key.  This tells the driver not to look at the device      
  32.  manufacturer info.  Please get on the phone and abuse SONY, as they must add   
  33.  the support to ensure we will continue to have our CD access thru OS2.         
  34.                                                                                 
  35.   Good Luck!                                                                    
  36.