home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!sun-barr!decwrl!csus.edu!netcomsv!bai!tony
- From: tony@bai.baylis.COM (Tony von Ruden)
- Newsgroups: comp.os.os2.misc
- Subject: CDROM on Media Vision PAS-16
- Distribution: na
- Message-ID: <711926642snx@bai.baylis.COM>
- References: <1992Jul18.160950.21118@polari>
- Date: Thu, 23 Jul 92 21:24:02 GMT
- Organization: Baylis Automation, Inc.
- Lines: 24
-
-
- In article <1992Jul18.160950.21118@polari> jsanchez@polari.online.com writes:
-
- >
- > I have what appears to be many folks problem. Namely, I want to use my
- > cdrom under both DOS and OS/2. My dealer talked to Media Vision and they
- > claimed that the SCSI card on the PAS-16 is a Trantor 128 and that the
- > Trantor drivers recently posted to hobbes would work. I installed the
- > driver, CDFS.IFS, and CDROM.SYS on my system and rebooted. What I found
- > was that CDROM.SYS reported "No SCSI Devices" and refused to load and then
- > the trantor driver would not install.
- >
- > Any ideas? I have an adaptec 1542B on my system too.
- >
-
- I'm running a Toshiba 3201-B CDROM off my PAS+ in a DOS5 session with the
- DOS drivers that MV sells for $40. It seems to work OK. I have talked
- to TRANTOR myself, and told me that the their drivers won't work with the
- chip on the PAS series cards. You'll have to find a real Trantor SCSI card.
-
- Tony von Ruden tony@baylis.com
- Baylis Automation ...!netcomsv.netcom.com!bai!tony
- 5550 Scotts Valley Dr, Suite 500 voice: (408) 438-7327
- Scotts Valley, CA 95066 fax: (408) 438-1105
-