home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.os.linux
- Path: sparky!uunet!gatech!europa.asd.contel.com!darwin.sura.net!convex!constellation!munnari.oz.au!metro!extro.ucc.su.OZ.AU!joef
- From: joef@extro.ucc.su.OZ.AU ()
- Subject: Re: X will not run after recompile of kernel
- Message-ID: <joef.712500639@extro.ucc.su.OZ.AU>
- Sender: news@ucc.su.OZ.AU
- Nntp-Posting-Host: extro.ucc.su.oz.au
- Organization: Sydney University Computing Service, Sydney, NSW, Australia
- References: <NEGAARD.92Jul27122123@fungus.aero.org> <1992Jul28.090311.23301@bernina.ethz.ch> <NEGAARD.92Jul29085425@fungus.aero.org> <1992Jul29.200948.21187@mach4.wlu.ca>
- Date: Thu, 30 Jul 1992 12:50:39 GMT
- Lines: 17
-
- gis@mach4.wlu.ca (gis research) writes:
-
-
- >My setup is as follows: 486/33 with math-co
- > 8 Meg RAM/10 Meg swap
-
- >Any ideas would be much appreciated. Thanks,
-
- I would suggest that you rip out whatever is in the 'math-co' position as
- the 486 has a inbuilt co-processor. Things that go in the other position are
- things like DX2's [I am lead to beileve]
-
- Joe
-
- ---
- joef@extro.ucc.su.oz.au [apparently changing to extro.cs.su.oz.au]
-
-