home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!mcsun!Germany.EU.net!news.netmbx.de!zelator!kwcom!root
- From: root@kwcom.in-berlin.de (Olaf Matthaei)
- Newsgroups: comp.os.coherent
- Distribution: world
- Subject: Re: uucico errors reported using PEP at 19200 port speed
- References: <9207251421.35@duncan>
- Message-ID: <9207283953@kwcom.in-berlin.de>
- Organization: Communication KWH Germany,KW
- Date: Tue, 28 Jul 92 18:51:01 +0100
- Lines: 27
-
- kwcom!cs.dal.ca!iisat!duncan!root (David John Murdoch) writes:
- >
- > I'm using a Trailblazer Plus with BC 7.0 chip update,
- > V3.2.015K of COHERENT and V3.2.24S uucico to uucp compressed news in PEP
- > and uucp spoofing mode from another site. My serial port speed is set to
- > 19200 and the uulog reports lots of errors but my transfer rate is
- > averaging around 680bps. The rate is considerably reduced at a
- > port speed of 9600.
-
- I think your serial IC does'nt work on 19200 Bps. Its a general
- problem by IBM-PC's. You can change this chip.
-
- Or: if you work on a slow mashine (286/16 ) many interrupts
- lost by 19200 Bps. So a lot of characters come from or go to
- serial port are lost by kernal routines.
-
- -------
- Mfg
-
- +----------------------------+----------------------------------------------+
- | Olaf Matthaei | root@kwcom.in-berlin.de |
- | Luckenwalderstrasse 11b +----------------------------------------------|
- | O-1600 KOENIGSWUSTERHAUSEN | KW-COMMUNICATION |
- | Tel. +49 3375 504024 | V21, V22, V22bis, MNP1-5, V42bis |
- +---------------------------------------------------------------------------+
-
-
-