home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.dcom.modems
- Path: sparky!uunet!paladin.american.edu!darwin.sura.net!mips!mips!sjsca4!rushmore!poffen
- From: poffen@rushmore (Russ Poffenberger)
- Subject: Re: WorldBlazers and SLIP
- Message-ID: <1992Jul30.193237.21562@sj.ate.slb.com>
- Sender: news@sj.ate.slb.com
- Organization: Schlumberger Technologies, ATE division, San Jose, Ca.
- X-Newsreader: Tin 1.1 PL4
- References: <1992Jul29.123304.14656@huracan.cr>
- Date: Thu, 30 Jul 92 19:32:37 GMT
- Lines: 30
-
- hope@huracan.cr (Theodore Hope) writes:
- :
- : In <1992Jul29.021155.2461@mccc.edu> pjh@mccc.edu (P. J. Holsberg) writes:
- :
- : > What are the proper S-register settings for a WorldBlazer to connect via
- : > SLIP using KA9Q?
- :
- : In general, lock the DTE side at some fixed rate (57,600 in your case),
- :
- : MAKE SURE you have rts/cts flow control (NO XON/XOFF, OR YOU'LL HAVE PROBLEMS)
- : (I think it's s58=2 and s68=2) and tell ka9q that you have it (can't remember
- : right now, maybe the "cr" flag to "attach asy" command.) If you have a
- : 16550 (probably should if you're going to run as fast as the WB) make sure
- : ka9q is recognizing it.
- :
- : Other than that, the rest will depend on what you want -- autodial when
- : the modem turns on, leased line mode, LAPM, Compression, etc....
- :
- : -Theodore Hope
- : Proyecto Huracan - Fundacion Nahual
- : San Jose, COSTA RICA
-
- Since we are talking WB's here, you should probably make sure they connect
- in v.32bis mode NOT turbo-PEP. I suspect that because of the half-duplex
- nature of PEP, it would perform worse for something like SL/IP.
-
- Russ Poffenberger DOMAIN: poffen@sj.ate.slb.com
- Schlumberger Technologies UUCP: {uunet,decwrl,amdahl}!sjsca4!poffen
- 1601 Technology Drive CIS: 72401,276
- San Jose, Ca. 95110 Voice: (408)437-5254 FAX: (408)437-5246
-