home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.dcom.modems
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!wupost!darwin.sura.net!jvnc.net!johnson
- From: johnson@tigger.jvnc.net (Steven L. Johnson)
- Subject: Re: Why is my WB that slow in PEP-mode ?
- Message-ID: <1992Jul25.193713.14160@tigger.jvnc.net>
- Originator: johnson@tigger.jvnc.net
- Sender: news@tigger.jvnc.net (Zee News Genie)
- Nntp-Posting-Host: tigger.jvnc.net
- Organization: JvNCnet
- References: <1992Jul19.113314.16182@jr.rhein-main.de> <1992Jul19.181846.17442@jr.rhein-main.de> <Brp704.Gv1@jwt.UUCP> <rhhm-3f.mccrate@netcom.com> <1992Jul25.015349.14966@telesys.tnet.com>
- Date: Sat, 25 Jul 1992 19:37:13 GMT
- Lines: 23
-
- kreed@telesys.tnet.com (Kevin W. Reed) writes:
- >mccrate@netcom.com (Joe McCrate) writes:
- >>john@jwt.UUCP (John Temples) writes:
- >>>>Have to disable compression at all ( ATS190=0 ).
- >>>>Then I have the same rates with either T2500 or WB.
- >>>I would say it's more correct to set S191=6.
- > ^^^^
- >>But in my Telebit manual there is no such register as S196.
- > ^^^^
- >Read Again....
-
- ...and S191 isn't in the manual either. It's in the separate addendum.
- "This register applies only to PEP connections when data compression is
- enabled (S190 is not equal to 0)."
-
- S190=1S191=7 allow both old PEP compression and V.42bis; prefer V.42bis.
- S190=1S191=6 would disable old PEP compression but would allow V.42bis
- to other WB's.
- S190=0 disables compression (s191 doesn't matter).
-
- At least that's how I read it, and maybe that's what Joe said also.
-
- -Steve
-