home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.dcom.modems:11046 comp.sys.ibm.pc.hardware:20172
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!wupost!waikato.ac.nz!comp.vuw.ac.nz!actrix!Steve.Withers
- Newsgroups: comp.dcom.modems,comp.sys.ibm.pc.hardware
- Subject: Re: 14,400 bps: Does any comm software support it?
- Message-ID: <1992Jul23.184645.19992@actrix.gen.nz>
- From: Steve.Withers@bbs.actrix.gen.nz
- Date: Thu, 23 Jul 1992 18:46:45 GMT
- Sender: Steve.Withers@actrix.gen.nz (Steve Withers)
- References: <csjohn.711865104@knuth> <1992Jul23.122353.18296@bnr.ca>
- Organization: Actrix Information Exchange
- Lines: 27
-
- In article <1992Jul23.122353.18296@bnr.ca> richard@bnr.ca (Richard A. Dault) writes:
- > In article <csjohn.711865104@knuth> csjohn@knuth.mtsu.edu (Bullwinkle) writes:
- > >
- > >I will be getting a 14,400 bps v.32/v.32bis/v.42/v.42bis
- > >fax/modem soon. I have noticed that on all of the MSDOS
- > >and OS/2 communications software that I have seen there is
- > >no setting for 14,400 bps, although there is for 9600 bps and
- > >19,200 bps. Is there any way to access the 14,400 bps
- > >speed, or am I stuck at 9600 bps for now? Is there any software
- > >out there that supports 14,400 bps? Thanks.
- >
- > No communication programs have a 14.4K baud setting.
- >
- > You set the comm speed to 19.2K baud for regular communication, or you set
- > it to 38.2K baud when using data compression. I always set mine to 38.2K
- > baud and when calling somewhere and the 'auto-detect' will slow it down if
- > necessary.
- > I use telix 3.15, you can set the comm speed to 38.2K baud.
-
- You should set it to 57,600 if you have a 14.4-capable modem with V.42bis.
-
- Steve
- --
- Steve Withers - Wellington, New Zealand | "But the glory kept shining
- Steve.Withers@bbs.actrix.gen.nz | and bright in my eyes,
- withers_s@kosmos.wcc.govt.nz | And the stars going round in
- **** Happy user of OS/2 v2!! **** | my head." R. L. S.
-