home *** CD-ROM | disk | FTP | other *** search
-
- /\
- / \
- / /
- / / /\ ONT MANAGER II
- \ \/ \
- \ / --- UTILITY ---
- \ /
- \ \
- \ \
- \ /
- \/
-
- -------------------------------------------------------------------
-
- Manual for !BootFM2
- Version 0.01
- For booting up !FontMGR2 in your boot sequence.
- © Andrew P. Lindesay 1994
-
- -------------------------------------------------------------------
-
- Written by Andrew Lindesay at Auckland, New Zealand.
-
- -------------------------------------------------------------------
-
- CONDITIONS OF USE AND LEGAL REQUIREMENTS
- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- Please take note of the usual requirements and conditions listed
- below:
-
- 1. You may use this software free of charge, it is freeware.
-
- 2. Copies of this software may be copied freely in any electronic
- form. PD libraries and magazines are at liberty to distribute
- it.
-
- 3. All copies *MUST* be distributed fully. Copies passed on
- *MUST* be unedited in any way, no file may be changed in
- any way in distributed copies.
-
- 4. No files associated with !BootFM2 may be used in any other
- applications. This is especially the case with sprites.
-
- 5. Myself, as the author of this software take no responsiblity
- for any loss of data or software that results from the use or
- misuse of this software in any circumstance.
-
-
-
- -------------------------------------------------------------------
-
- Author contact:
- ~~~~~~~~~~~~~~~
-
- Andrew Lindesay
- PO Box 28 548
- Remuera
- Auckland
- NEW ZEALAND.
-
-
- -------------------------------------------------------------------
-
- What use is this application?
- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- This application is a ultility for !FontMGR2. Subsequently,
- if you don't have !FontMGR2, then using this application for
- anything else is somewhat pointless.
-
-
- -------------------------------------------------------------------
-
- What does it do?
- ~~~~~~~~~~~~~~~~
-
- Essentially, what it does is store where you keep your
- !FontMGR2 on your hard disc. When you run this application,
- notably from a !Boot file or just running it normally,
- it will instantiate !FontMGR2's default fonts that you have
- selected by using the !FontMGR2 application.
-
- The idea is very simple, this allows you to setup the
- 'desired' fonts at startup. So when you turn your
- computer on, the fonts will be ready for use. I can't go
- into a description of how to do this here, but refer to
- the manuals supplied with the computer in order to
- obtain this information.
-
-
- -------------------------------------------------------------------
-
- How do I use it?
- ~~~~~~~~~~~~~~~~
-
- To set, or change !BootFM2's file concerning the position of
- !FontMGR2 then hold down the control [Ctrl] key, and run the
- !BootFM2 application again.
-
- A window will open, just drag the copy of !FontMGR2 that you
- use onto that window. Once this is done, clicking the
- obvious [OK] button will save the position of !FontMGR2 onto
- disc. If you want to change this again, just reperform this
- entire simple operation. To setup the position manually,
- edit the writeable icon in the window before clicking [OK].
-
- Clicking [Cancel] closes the window, and ignores anything you
- might have done.
-
-
- -------------------------------------------------------------------
-
- - HAPPY FONTING & Sorry about the spelling mistakes. -