menumo1b:Make a mould ⇧F5,Mould object ⇧F6|Extract mould ⇧F7,Unmould object ⇧F8
menute1t:Text
menute1b:Enter text ^T|Font name,Font size,Font height|Normal ^F1,Follow path ^F2,In a mould ^F3|Get text data,Alter text data|Extract path/mould,Text to path
menute2t:Text entry
menute2b:____________________
menute3t:Font size
menute3b:10,20,50,100,200 ,20.0
menute4t:Font height
menute4b:10,20,50,100,200,20.0
menute5t:Font style
menute5b:Left justify,Right justify,Centre,Word full-justify,Character full-justify,Adjust size to fit,Adjust width to fit|Hanging,Other end,Back to front,Upside down|Slanted,Crazy|Wall shadow,Floor shadow,>Shadow line,>Shadow fill
smenutxt5:Enter text ^T|Font name,Font size,Font height,>Text colour|Normal ^F1,Follow path ^F2
smenutit6:Text area
smenutxt6:Columns,Justification|Create,Edit ^E
smenutit7:Grid
smenutxt7:Show F7,Lock F8
# Draw file standard messages
drwerr1:Bad object
drwerr2:Bad object handle
drwerr3:Too many font definitions
drwerr101:Bounding box coordinates are in the wrong order
drwerr102:Bad character in string
drwerr103:Object size is too small
drwerr104:Object size is too large
drwerr105:Object size is not a multiple of 4
drwerr106:Object data is larger than specified size
drwerr107:There is more than one font table
drwerr108:The font table appears after text object(s)
drwerr109:Bad text style word
drwerr110:Path must start with a move
drwerr111:Path contains an invalid tag
drwerr112:Path does not contain any line or curve elements
drwerr113:There is extra data present at the end of a path object
drwerr114:The sprite definition size is inconsistent with the object size
drwerr115:Missing end marker in text columns
drwerr116:Actual number of columns in a text area object does not match specified number of columns
drwerr117:Non-zero reserved words in a text area object
drwerr118:This is not a Draw file
drwerr119:Version number too high
drwerr120:Unknown object type
drwerr121:Text area version number is wrong or missing
drwerr122:Text area must end with a newline character
drwerr123:Text area: bad \A code (must be L, R, C or D)
drwerr124:Text area: bad number or missing terminator
drwerr125:Text area: more than one \D command
drwerr126:Text area: bad font number
drwerr127:Text area: unexpected character in \F command
drwerr128:Text area: bad or missing font width in \F command
drwerr129:Text area: bad or missing font size in \F command
drwerr130:Text area: non-digit in \V command
drwerr131:Text area: bad escape sequence
drwerr133:Text area must have at least one column
drwerr134:Out of memory when building text area
# Message file for 'c.border'
border1:Unable to load (Border) resources
border2:Default border loaded
border3:Bad border data (the border file does not conform to proper format) - loading default border instead
border4:Attempt to use default has failed. Data corrupted
border6:Border cannot be this small (top)
border7:Bad border data (top)
border8:Border cannot be this small (right)
border9:Bad border data (right)
border10:Border cannot be this small (bottom)
border11:Bad border data (bottom)
border12:Border cannot be this small (left)
border13:Bad border data (left)
border14:A border must have some selected objects to surround
# Message file for 'c.editobj'
editobj1:Illegal object size adjustment
editobj2:Couldn't adjust object size
editobj3:Error while deleting object
editobj4:move object to back
editobj5:move object
editobj6:add a group object
editobj7:You cannot delete an object that is being edited
# Message file for 'c.fancytext'
ftext1:Fatal error whilst freeing memory
ftext2:Unknown path element type
ftext4:Font '%s' is not an Outline font
ftext5:Could not find font '%s'
ftext6:Font '%s' is a faulty font file (illegally recursive)
ftext7:Bad font file - '%s' does not conform to font file format
ftext8:Poster cannot read Outline font files greater than version 7 when 'Pathing' or 'Moulding' ('%s' has a version no. of %d)
ftext9:Unknown text justification option
ftext10:Acting on these settings would result in nothing being created - please adjust or check your text settings for this path (eg. is the text size too big for this path?)
ftext11:Silly! - Text consists only of spaces!
ftext12:Text cannot follow a path unless a single line/curve object is selected in this poster
ftext13:Text can only follow path objects
# Message file for 'c.help'
help1:Box: top/right at
help2: to bottom/left at
help3:Poster: pointer =
help4:Moving: change =
help5:SELECT: Select a single object (also DOUBLE-CLICK and DRAG)|MADJUST: Add an object to the selection (also DRAG)
help6:Corner scaling:|M
help7:Uniform scaling:|M
help8:Edge scaling:|M
help9:Magnifying:|M
help10:Rotating:
help11:Set paper size:|MSelect the desired size for the poster. Click on OK to set the new size.
help12:Style:|MSelect the desired style parameter.
help13:Style: Select the desired style for adding text, or alter the style of selected objects.|M'GET' will get the style of the first selected object.|M'SET' will set the style of all selected objects.
help14:Border:|MMENU allows you to choose a new style.|M'Surround' places the border around all the selected objects.
# Message file for 'c.loadsave'
loadsav1:You can only load POSTER, DRAW, COMPRESSED DRAW, SPRITE, or TEXT files
loadsav4:File cannot be loaded
loadsav6:load the poster
loadsav8:No font available for text area (double click on a !Fonts directory)
loadsav9:'%s' is not of a known file type
loadsav10:You cannot save from a poster into itself
loadsav11:Replace existing text?
loadsav12:Unable to add new diagram
loadsav13:Error in deleting object
loadsav14:Nothing has been selected for saving
loadsav16:Nothing has been selected for saving without tags
loadsav19:No SPRITES have been selected for saving
loadsav21:Only ONE object (a text area) must be selected to use this function
# save-selected default filename
loadsav15:Selected
# save-selected-drawfile default filename
loadsav17:DrawFile
# save-all-drawfile default filename
loadsav18:DrawFile
# save-sprite default filename
loadsav20:Sprite
# save-textarea default filename
loadsav22:Text_Area
# Message file for 'c.normtext'
normtext1:Error while tidying font table object
normtext2:Too many normal-text fonts in this diagram - cannot add another
normtext4:Fonts
normtext5:Font family '%s' has too many sub-styles for the current menu system to handle. Regrettably some of the sub-styles must be disregarded
normtext6:There are too many fonts available for the current menu system to handle. Regrettably some of the fonts must be disregarded
# Message file for 'c.paper'
paper1:create a new view
paper2:Shadow line
paper3:Shadow fill
paper4:Delete buffer is empty
paper5:Grid colour
paper6:Demo Version
paper7:Name of file to load:
# Message file for 'c.print'
print1:Printer pages are
print2:too small to plot
print3:Unable to create page picture for print window
print4:Bad number of copies: %d
print5:Error while drawing poster for printing
print6:No printer driver is present
print7:A printer driver must be present before printing can proceed
# Message file for 'c.protect'
protect1:Could not set copyright
protect2:Couldn't enable disc (write-protected or not a legal disc)
protect3:A name of at least 4 letters must be entered
protect4:What a strange name you have! Use a more sensible name please
# Message file for 'c.select'
select1:Cannot select any more - selection table full
select2:No objects selected for moving to the front
select3:No objects selected for moving to the back
select5:No objects selected for grouping
select6:Cannot group only one object
select8:No objects selected for splitting
select9:Memory error whilst splitting group
select10:No objects selected for tag removal
select11:Memory error whilst removing tag(s)
select12:There is insufficient memory to copy deleted objects to the deletion buffer - do you wish to continue the deletion?
select13:No objects selected for flipping
select14:No objects selected for copying
select15:copy all objects
select16:No objects selected for moving
select17:move all objects
select18:Nothing is selected
select19:No GROUPs selected for justification
select20:Only one object can be selected for editing
select21:You can only edit text areas
select22:You cannot group an object that is being edited
# Message file for 'c.size'
size1:Unknown size unit
size2:Cannot save custom sizes
# default custom size name entry
size3:size_name
size6:Preset sizes not found
# Message file for 'c.skeleton'
skel3: Lock
skel8:Internal
skel9:An error (%d:%s) has occurred. Poster cannot recover. You can, however, do an emergency save of any changes. These files may not be reliable however.
skel10:Usage: !Poster [-Print] [filename]
skel11:create a new poster
# Message file for 'c.style'
style1:Fill colour
style2:Line colour
style3:Font line
style4:Font fill
style6:Back line colour
style7:Back fill colour
style9:Start caps
style10:End caps
style11:load resources
# Message file for 'c.textarea'
textarea1:Bad text area (no font name)
textarea2:Couldn't find the font definition (textarea)
textarea3:One text area must be selected
textarea4:No TEXT AREA objects are selected
textarea5:You can only edit ONE text area at a time
textarea6:The textarea object has been deleted
textarea7:Unable to update text area
textarea8:You cannot create a TEXT AREA while editing another
# Message file for 'c.warp'
warp2:No objects selected to make a mould with
warp3:Either TWO or FOUR lines (grouped or separate) must be selected to make a mould
warp4:Bad font file element
warp5:Invalid text - has no width
warp6:The selected mould must be in the same poster as the text
warp7:ONE mould must be selected to place text over
warp8:One MOULD must be selected to place text over
warp9:Bad mould
warp10:You must be in the same poster as the selected mould
warp11:ONE mould and at least one path must be selected
warp12:ONE mould must be selected to warp paths over
warp13:No PATHs have been selected
warp14:The selected object(s) to mould have no width/height
warp15:Some of the selected (non-path) objects cannot be moulded. They will disappear. Do you still wish to continue?
warp16:Mould has been lost
warp17:Bad mould - no length
warp18:No text has been selected
warp19:Only ONE object must be selected
warp20:Only ONE object can be altered
warp21:Only a text object of the selected type can be altered
warp22:ONE TEXT-ON-PATH or TEXT-ON-MOULD object must be selected
warp23:One TEXT-ON-PATH or TEXT-ON-MOULD object must be selected
warp24:ONE PATH-ON-MOULD object must be selected
warp25:One PATH-ON-MOULD object must be selected
warp26:Memory error whilst un-moulding object
untitled:Poster: <untitled>
poster:A_Poster
# c.misc
misc1:'%s' has been modified. What should be done?
# c.fonttable
fonttable1:Too many normal-text fonts in this diagram - cannot add another
# c.edittext
edittext1:Poster textarea
edittext2:edit text
edittext3:Your text area has been changed. Do you wish to update it ?