home *** CD-ROM | disk | FTP | other *** search
- ***********************************************************************
-
- IMPORTANT INFORMATION
- for
- mach32 Users
- ***********************************************************************
- VGRAF September 1, 1994
- ***********************************************************************
-
- READ THIS FILE COMPLETELY BEFORE ATTEMPTING TO USE THIS PRODUCT !
-
- ****************************
-
- Contents
-
- 1.0 Introduction
- 2.0 Requirements
- 3.0 Installation
- 4.0 Errors
-
- ****************************
-
- 1.0 Introduction
-
- VGRAF is a utility to view TARGA (tm) or AutoDesk Animator files on an
- mach32 accelerator based graphics product. TARGA file format types of 1,
- 2, 9, and 10 are supported up to a maximum resolution of 1280x1024.
- This includes uncompressed, RLE compressed, and colormapped 16 or 24
- bit per pixel images. See VGRAF.TXT for operation details or run
- VGRAF with no command options and press F1 to view the help file.
-
- ****************************
-
- 2.0 Requirements
-
- A mach32 accelerator card with a minimum of 1MB
- of video memory.
-
- ****************************
-
- 3.0 Installation
-
- This program requires no special install procedures except for properly
- installing the mach32 accelerator card with it's supplied INSTALL.EXE
- program. The resolutions and color depths available will depend on the
- capability of the video card and how it is installed.
-
- ****************************
-
- 4.0 Errors
-
- The supported resolutions and color depths are dependant on the video
- card capability (memory, DAC type, chip set) and how it is installed
- (determined by the video card's INSTALL.EXE program). This program
- should not be executed in an environment which uses accelerator modes of
- the video card (i.e Windows, OS/2 which uses an accelerator driver).
-