1 There was an error when trying to read the file %1.
2 There was an error when trying to write the file %1.
3 F-Secure Management Agent does not have sufficient access rights. Directory %1 could not be accessed.
4 The F-Secure installation process was not able to find the file %1 that contains the installation instructions.
10 The F-Secure installation process was cancelled because of badly formatted or incorrect installation instructions.
20 The received policy value is not supported. OID: %1.
99 F-Secure Intelligent Installation encountered an undefined error. Check the amount of available memory.
100 The F-Secure installation process could not be started because of problems with internal communication in F-Secure Management Agent. You can try closing some programs or rebooting the machine. If you see this message frequently contact the system administrator.
101 CH was not reached.
102 The base policy file on F-Secure Management Server is invalid. This may happen if someone has manually replaced the file. If the problem persists, please contact the system administrator.
103 F-Secure Management Agent: The file %1 did not pass signature verification. The file may have been manually modified. If the problem persists, please contact the system administrator.
104 An error occurred when trying to use the key that is in the file %1.
201 The Incremental Policy file was invalid or missing.
202 The previous policy version was taken into use.
203 There was an unsuccessful attempt to change to previous policy version.
204 F-Secure Management Agent failed in an internal operation. Setting the policy variable %1 was not successful. If the problem persists, please contact the system administrator.
205 The module %1 monitored by F-Secure management Agent has stopped responding or was terminated. An attempt to restart it will be made later. If you see this message frequently, contact the system administrator or reinstall F-Secure products.
206 The module %1 monitored by F-Secure management Agent has stopped responding or was terminated. Restarting it was not possible and it will not be functional until the computer is restarted. If this message appears after restarting the computer, contact the system administrator or reinstall F-Secure products.
207 F-Secure Management Agent encountered an internal failure. It cannot monitor the status of a module or a plug-in and it may not be functional until the computer is restarted. If you see this message frequently, contact the system administrator or reinstall F-Secure products.
208 F-Secure Management Agent failed to get a value (%1) from the policy. If you see this message frequently, contact the system administrator or reinstall F-Secure products.
209 A new base policy was either manually installed or retrieved from the network. It was ignored because the current base policy has the same serial number.
210 A module or plug-in of F-Secure Management Agent has crashed (%1). Restarting the module has been attempted %2 times and it will not be functional until the computer is restarted. If you see this message frequently, contact the system administrator or reinstall F-Secure products.
211 Module %1 did not respond to the ping message. Restart will be attempted later.
212 Module %1 did not respond to the ping message. Trying to restart the module is not possible.
220 F-Secure Management Agent has succesfully connected to the server and is now operating in Online Mode.
221 F-Secure Management Agent was not able to connect to the server and is now operating in Offline Mode. (error number %1: %2)
222 F-Secure Management Agent has succesfully sent an autoregistration request to the server and is waiting for the administrator to register this host and distribute policies.
223 F-Secure Management Agent has failed to sent an autoregistration request to the server. Check the server name/URL, network settings and that the server is working properly.
230 F-Secure Management Agent has detected new communication settings that have failed to work immediately and switched back to the last known good settings. This may be caused by a temporary loss of connection to the F-Secure Management Server or by a set of invalid communication settings.
231 F-Secure Management Agent has started using the new communication settings successfully and is again operating in normal mode.
240 The incremental policy file (policy.ipf) was corrupted and a backup copy of it was successfully taken into use. Some local settings or statistics may have been lost.
241 The incremental policy file (policy.ipf) was corrupted and no valid backup copy was available. Incremental policy was cleared. All local settings and statistics have been lost.
300 The F-Secure installation process has failed. A system error occured during the preparation of an installation process. If this is a logon script installation, check that the user running the installation program has administrative rights.
301 The F-Secure installation process has failed to unpack an installation package. Please check the integrity of the installation package. If you see this message frequently, contact the system administrator.
302 The F-Secure installation process did not find any installation instructions inside the installation package. Nothing to do.
303 The F-Secure Installation process has failed. The setup program could not be started or a system error occurred before the setup program had finished.
304 The F-Secure installation process encountered an internal failure. Management Agent was not able to transfer the installation package on the local computer. If you see this message frequently, contact the system administrator or reinstall F-Secure products.
305 F-Secure Management Agent has been shut down during the preparation of the installation procedure. The installation of new packages was canceled.
306 F-Secure Management Agent could not get the results for the previous installation. The setup program may have hung up. If the F-Secure Management Agent does not work properly after the computer has been rebooted, please contact the system administrator or reinstall F-Secure products.
400 Internal error occurred in FSWAA, error code %1: %2
401 FSWAA: Unknown carrier name "%2" defined in policy (err %1)
402 FSWAA: Unknown messager extension "%2" defined in policy (err %1)
403 FSWAA: The forwarding table does not have any phone number(s) (err %1)
404 FSWAA: Configured 3rd party software %2 could not be found or started (err %1)
405 FSWAA: Configured 3rd party alerting software returned error code %2
406 FSWAA: General modem error %1 occurred, MMCODE=%2
407 FSWAA: Modem received busy signal
408 FSWAA: No dial tone, modem offline or general TAPI failure
409 FSWAA: General GSM error %1 occurred, MMCODE=%2
410 FSWAA: GSM not connected to computer or not functional (err %1,%2)
411 FSWAA: The messager component was not able to deliver the message in time (err %1)
501 Setup error: %1 (If you see this message frequently, please contact your administrator.) \n
502 The F-Secure installation process encountered an error: Setup plug-in returned an error. (If you see this message frequently, please contact your administrator.)
503 The F-Secure installation process could not unpack the installation package. There is not enough free space on the hard disk.
504 The F-Secure installation process detected a newer version of a product installed on the system.
601 F-Secure GINA could not be re-activated because of a race condition with another application.
602 Network Provider order could not be changed because of a race condition with another application.
603 All of the login methods were disabled in the policy. The host now uses the Windows Password login method. Please enable one or more login methods.
700 F-Secure Certificate handler was unable to connect to LDAP server. TCP/IP error: %1 \nIt is possible that the LDAP server is unreachable or the server address is incorrect.
701 F-Secure Certificate Handler found an invalid certificate in the policy. Policy table OID:%1, Row:%2. \nPlease check that certificates configured in F-Secure Administrator and VPN+ local user interface are valid certificates.
702 No trusted certificates defined in policy. Certificates cannot be verified without trusted certificates. Please add a trusted CA-certificate through F-Secure Administrator or VPN+ local user interface.
703 Trust Level setting in policy is set to "Secure", but no LDAP server connection has been defined. Automatically reverting to "Normal" trust level.
704 VPN+ host certificate is not valid. Validation error: '%1', description: '%2'. This is typically caused by a missing CA-certificate, missing certificate revocation list (CRL) or certificate expiration.
705 Failed to send a certificate request to the F-Secure Management Server. Error: %1
