home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Computer Buyer 1997 December
/
dpcb1297.iso
/
Internet
/
Surfdial
/
SETDUN.TXT
< prev
next >
Wrap
INI File
|
1997-02-13
|
3KB
|
82 lines
[Components]
Component1=Dial-Up Networking
Component2=Dial-Up Adapter
Component3=TCP/IP Protocol
Component4=Modem
Message=%s has to be installed before you run this setup.
Title=%s not detected
[Programs]
Component1=APPWIZ.CPL
Component2=NETCPL.CPL
Component3=NETCPL.CPL
Component4=MODEM.CPL,,add
[Restart]
Component1=1
Component2=1
Component3=1
Component4=0
[Exit]
Component1=1
Component2=1
Component3=1
Component4=0
[Component1]
M1="Please step through the following procedure:"
M2=" "
M3="╖ click on the Windows Setup tab in the Add/Remove"
M4=" Programs Properties window,"
M5="╖ double-click the Communications item,"
M6="╖ check the Dial-Up Networking checkbox in"
M7=" the Communications window,"
M8="╖ click OK button to close the Communications window,"
M9="╖ click OK button to install the dial-up networking,"
M10=" "
M11="After completing the procedure press Next to restart"
M12="the computer."
[Component2]
M1="Please step through the following procedure:"
M2=" "
M3="╖ click the Add button in the Network window,"
M4="╖ double-click the Adapter item in the Select Network"
M5=" Component Type window,"
M6="╖ select Microsoft from the Manufacturers list in the"
M7=" Select Network adapters window,"
M8="╖ select the Dial-Up Adapter from the Adapters list,"
M9="╖ click OK button to close the Select Network adapters window,"
M10="╖ click the Add button in the Network window,"
M11="╖ double-click the Protocol item in the Select Network"
M12=" Component Type window,"
M13="╖ select Microsoft from the Manufacturers list in the"
M14=" Select Network adapters window,"
M15="╖ double-click the TCP/IP item from the Network"
M16=" Protocols list,"
M17="╖ click OK button to install the dial-up adapter,"
M18=" "
M19="After completing the procedure press Next to restart"
M20="the computer."
[Component3]
M1="Please step through the following procedure:"
M2=" "
M3="╖ click the Add button in the Network window,"
M4="╖ double-click the Protocol item in the Select Network"
M5=" Component Type window,"
M6="╖ select Microsoft from the Manufacturers list in the"
M7=" Select Network adapters window,"
M8="╖ double-click the TCP/IP item from the Network"
M9=" Protocols list,"
M10="╖ click OK button to install the TCP/IP protocol,"
M11=" "
M11="After completing the procedure press Next to restart"
M13="the computer."
[Component4]
M1="Please the Install New Modem Wizard instructions."
M6=" "
M7="After completing the procedure press Next to continue setup."