1002 The Internet Connection Wizard has not finished setting up your Internet connection.\n\nAre you sure you want to exit the wizard?
1003 Error %lu occurred.
1004 RASAPI32.DLL
1005 %s (%d)
1006 %s...
1007 Internet Mail Settings
1008 MAPI32.DLL
1013 RNAPH.DLL
1015 Dial-Up Networking error %lu occurred.
1016 MAPI error 0x%lx occurred.
1022 INTERWIZ.HLP>medium
1026 mos105.inf
1027 Rome.Uninstall
1028 mos.inf
1029 MaintMode.Uninstall
1030 All files (*.*)*.*Dial-Up Script (*.SCP)*.SCPText files (*.TXT)*.TXT
1031 ICFG95.DLL
1032 ICFGNT.DLL
1050 IMAIL
1051 MSPST MS
1052 MSPST AB
1053 Internet Mail
1054 Personal Information Store
1055 Personal Address Book
1056 Internet Mail Settings
1057 Internet Mail Settings #%u
1060 mailbox.pst
1061 mailbox%u.pst
1062 personal.pab
1063 persnl%u.pab
1100 There is not enough memory to continue. Close down one or more applications and try again.
1101 Cannot start the Install New Modem Wizard because of the following error:\n%1\n\nTry installing a modem by double-clicking the Modem icon in Control Panel.
1102 Cannot get configuration information about your computer because of the following error:\n%1
1103 Cannot initialize OLE. Close down one or more applications and try again.
1106 Cannot load the Remote Network Access library (RASAPI32.DLL). The following error occurred:\n%1
1107 The Remote Network Access library (RASAPI32) on your computer is not the correct version. You may need to install a different version of Windows.
1109 Cannot create a new dial-up networking connection for your Internet service provider.\n\nTry creating a connection by double-clicking Dial-Up Networking in My Computer.
1110 Cannot set up your Internet mail because the Mail library could not be loaded. The following error occurred:\n%1
1111 Cannot set up your Internet mail because the Mail library (%1) on your computer is not the correct version. You may need to install a different version of Windows.
1112 Cannot initialize MAPI.
1114 Cannot configure Microsoft Exchange with your account information. The following error occurred:%\n%1\n\nTry entering your account information by double-clicking the "Mail and Fax" icon in Control Panel.
1115 "%1" is not a valid name. The entry name must contain at least one character that is not a space and cannot contain any of the following characters:\n\n \ / : * ? " < > |\n\nChoose a different name.
1116 Cannot set the Internet phone number because of the following error:\n%1\n
1119 Cannot set DNS configuration because of the following error:\n%1\n
1120 Cannot uninstall the MSN Internet Access Kit because of the following error:\n%1\n
1121 Cannot determine if you have a modem because of the following error:\n%1\n\Install a modem by double-clicking the Modem icon in Control Panel.
1123 Cannot configure the proxy server with your account information. The following error occurred:%\n%1
1124 Cannot load the Internet Configuration library (ICFG95.DLL). The following error occurred:\n%1
1125 The Internet Configuration library (ICFG95.DLL) on your computer is not the correct version. You may need to install a different version of Windows.
1126 Cannot load configuration information for the selected connection. Select a different connection, or create a new connection.
1127 Cannot load the configuration information for the selected account. Select a different account, or create a new account.
1128 A connection with this name already exists. Type a different name.
1134 Cannot find a dial-out modem. Check the Remote Access Service properties and make sure that at least one modem is configured to dial out.
1135 The selected connection is a CSLIP connection. The Internet Connection Wizard does not support modifying a CSLIP connection.
1136 You must specify a proxy server to use. Enter a valid server name.
1137 Cannot load the Internet Configuration library (ICFGNT.DLL). The following error occurred:\n%1
1138 The Internet Configuration library (ICFGNT.DLL) on your computer is not the correct version. You may need to install a different version of Windows.
1139 "%1" is not a valid name. The entry name must contain at least one character that is not a space and cannot begin with a period. Choose a different name.
1200 You may not be able to connect to your Internet service provider without your user name.\n\nAre you sure you want to continue with a blank user name?
1201 If you do not specify a DNS server, you may not be able to find servers on the Internet. Are you sure you want to continue?
1203 You may not be able to connect to your Internet service provider without your password.\n\nAre you sure you want to continue with a blank password?
1205 File and printer sharing is running on the same TCP/IP connection you will use to access the Internet. Other users on the Internet might %1
1207 be able to access your files.\n\nDisabling file and printer sharing is strongly recommended. Do you want Windows to disable file and printer sharing on the TCP/IP connection to the Internet?
1208 File and printer sharing is running on the same TCP/IP connection you will use to access the Internet. Other users on the Internet might %1
1209 be able to access your files. You cannot continue unless you disable file and printer sharing.\n\nWindows will now disable file and printer sharing on the TCP/IP connection to the Internet.
1221 Uninstalling Microsoft Plus! will also uninstall The Microsoft Network. You will have to set up The Microsoft Network again in order to use it.
1230 Your system is not completely set up to access the Internet. Would you like Windows to set it up for you now?
1231 Windows will now install files and drivers required to access the Internet. You may be prompted for your Windows CD-ROM or floppy disks.\n\n%s
1232 Click OK to continue, or click Cancel to quit.
1233 Internet
1234 Internet (Backup)
1235 Your system is already configured to connect to the Internet. Do you want to keep your current settings?
1236 The Internet Connection Wizard could not configure your computer for the Internet.\n\nYou must manually set up your own TCP/IP protocols, dial-up networking connection, and modem, ISDN line, or other device you use to dial out from your computer.
1237 The Internet Connection Wizard could not start the RAS services and therefore cannot continue. Please check the services control panel to make sure these services were installed properly and they are not disabled.
1250 You must enter the phone number you use to connect to your Internet service provider.
1251 You must enter the IP address for your Internet service provider.
1252 You must enter a name for this dial-up connection (typically the name of your Internet service provider).
1253 You must enter a profile name.
1254 You must enter the area code for your Internet service provider.
1255 The profile name you typed is already in use. Type a different name.
1260 The port number you entered is incorrect. Port information can only contain the numbers 0 through 9.\n\nType the port number again.
1262 The phone number you entered contains invalid characters. Only the characters 0123456789ABCDPTW!@$-.()+*#,& and <space> are valid phone number characters.
1300 "%1" is not a valid IP (Internet Protocol) address. An IP address has four numbers in the range 0-255 separated by periods, such as 123.8.5.1.\n\nIf you don't know what address to type here, contact your Internet service provider.
1303 Installing files...
1320 You have selected the "%s" dial-up connection. Do you want to change the settings for this connection?
1323 Choose Connection Type
1324 The logon script you entered could not be located.\n\nEnter a valid script name.
1400 If you already have an account with an Internet service provider and have obtained all the necessary connection information,
1401 you can connect to your account using your phone line. If you are connected to a Local Area Network (LAN) that is connected to the Internet, you can access the Internet over the LAN.
1402 The dial-up connection contains the settings your computer uses to connect to the Internet. You already have one or more dial-up connections on your computer.
1403 Either create a new dial-up connection or use an existing one. If you choose an existing connection, you can change its settings later.
1430 In order for the Internet Connection Wizard to continue, you must restart your computer, and then re-run the wizard. To restart your computer now, click Yes. To quit the wizard, click No.\n\nDo you want to restart your computer now?
1431 Checking Windows networking setup
1432 Updating connection settings
1433 Install New Modem
1434 Modems Properties
1435 Only Single Byte Characters (SBCS) are allowed in this field.\n\nUse the Input Method Editor (IME) to switch to SBCS.
1436 Connection to
1437 RnaEngClass
3000 Success
3001 A resource is busy or you lack sufficient permissions
3002 Interface not supported
3003 One or more parameters passed by the calling application were not valid
3004 An unexpected error occurred
3005 The requested object does not exist
3006 Call not supported in this implementation
3007 Call succeeded overall, but some errors were returned
3008 Some, but not all, the entries were successfully copied
3009 The MAPI_UNICODE flag was set and this implementation does not support UNICODE
3010 Bad value supplied for a property
3011 The file being accessed was already in use
3012 The folder name being moved is the same as a sub-folder name in the destination
3013 The property cannot be written because it is computed by the destination provider
3014 Some data read from disk is corrupt
3015 Corrupt message store
3016 A disk error has occurred
3017 The folder being deleted contains folders
3018 The folder being deleted contains messages
3019 Invalid EntryID
3020 Invalid object
3021 Logon failed due to bad credentials
3022 A network error prevented successful completion of the operation
3023 It will take longer than expected to submit the message
3024 Not enough space on disk to complete
3025 Insufficient memory to complete operation
3026 Insufficient resources to complete operation
3027 The message was not in the outgoing queue
3028 The message has changed since it was opened
3029 The folder was deleted since it was opened
3030 The string is longer than the maximum allowable length
3031 The message has already been submitted
3032 There are more than 15000 property names
3033 Unable to abort the submission
3034 The service provider has not been configured
3035 Unexpected property type given to GetProps or SetProps
3036 Unknown flags given to the method
3037 The user cancelled the operation
3038 The provider version will not work with the MAPI version
