home *** CD-ROM | disk | FTP | other *** search
/ PC Gamer 2.13 / 1997-02_Disc_2.13.iso / patches / nemcd.zip / README.TXT < prev   
Text File  |  1996-11-06  |  3KB  |  82 lines

  1. Nemesis EXE Patch v1.0196 CDKB
  2. ---------------------------
  3.  
  4. What's the patch do?
  5. --------------------
  6.  
  7.         This is a replacement EXE file for those people who are having
  8. problems with Nemesis recognizing the CD that is inserted when changing
  9. discs. The common complaint was that Nemesis would say "Please insert
  10. CD number 5", the user inserts the disc, the drawer closes, Nemesis munches
  11. on the data for a while, then spits the disc back out, and asks for CD
  12. number 5 again, even though CD 5 -is- in the drive.
  13.  
  14.         The problem is that some CD drivers seem reluctant to update the
  15. volume label of the CD currently in the drive. Alot of the time, the volume
  16. label that the CD driver is reporting is actually the label of the last CD
  17. to be in the drive. This is obviously going to cause problems.
  18.  
  19.         This version of the patch has all the CD-ROM control code removed.
  20. What this means, is that Nemesis will not automatically eject the CD, even
  21. with that option enabled.
  22.  
  23.         When the prompt for another disk comes up on the
  24. screen, and you swap disks and hit a key, it will -immediately- check
  25. (using an alternative method to the volume name) the CD number, without
  26. waiting for the drive to spin up. This can cause the DOS error
  27. "Drive not ready: A)bort, R)etry, F)ail" message to come up if the drive
  28. is not at speed. You won't be able to see it, as the computer will be in a
  29. graphics mode. So, the following steps should be used to change CDs:
  30.  
  31.         1) Do not remove the CD until the "Insert CD" panel is actually
  32.                 on screen.
  33.         2) Open the drive, change to the proper disk.
  34.         3) Close the drive, and watch for the CD rom activity light to come
  35.                 on and go off. This usually takes about 5-10 seconds. The
  36.                 drive should now be at speed.
  37.         4) Hit enter on the keyboard, or click the mouse.
  38.  
  39.         If at this point, the CD icon comes up, the drive may or may not
  40. show some access, and nothing happens for 20-30 seconds, the drive probably
  41. wasn't quite ready, and you've gotten an A)bort, R)etry etc. message. Hit
  42. your "R" key to retry the access.
  43.  
  44.         Save your game before changing disks, just in case. When the system
  45. asks you if you want to enter an area involving a CD change, you can always
  46. answer "No", save the game, then repeat the action and go on.
  47.  
  48. What do I do with it?
  49. ---------------------
  50.  
  51.         Simply copy the NEM.EXE from the ZIP file over the NEM.EXE in the
  52. directory you installed Nemesis to. You might want to copy  the original
  53. NEM.EXE to another name before doing this, just in case the patch doesn't
  54. fix your problem.
  55.  
  56. If it doesn't fix my problem?
  57. -----------------------------
  58.  
  59.         If you're still experiencing difficulty, contact our technical
  60. support people. Please have ready all of the specifications on your machine,
  61. such as brand name, CD make and model, RAM size, video card make, hard drive
  62. make, model and size. It might also be helpful to print out copies of your
  63. AUTOEXEC.BAT and CONFIG.SYS just in case.
  64.  
  65. Compuserve e-mail: 76711,33
  66. Internet e-mail: 76711.33@compuserve.com
  67.  
  68. Sir-Tech Hotline
  69. (315)393-6633
  70. 4:00-8:00pm EST Monday through Friday
  71. 12:00 noon-4:00pm EST Weekends and Holidays
  72.  
  73. You might also keep an eye on our web page: www.sir-tech.com
  74.  
  75.  
  76. Derek Beland
  77. Lead Programmer for Nemesis
  78. Sir-Tech Software, Inc.
  79.  
  80.  
  81.  
  82.