3001 You current settings will be replaced with the settings in profile '%s'.\nWe have provided the options that you can choose to load only a part of configurations in this profile.\nYou can simply just load all configurations in the profile.\n\nTo load all configurations in this profile, click Yes.\n\nTo load a part of the configrations in the profile, click No.\n\nIf you don't want to load this profile, click Cancel.\n
3002 Load settings warning
3003 NVIDIA nView options
3004 NVIDIA nView control panel properties
3005 nView Desktop Manager
3006 Enable nView
3007 Disable nView
3008 You must enter the hot key name in the Name field in order to assign the hot key.
3009 Hot key assign error
3010 Enter the hot key by pressing a key combination in the "key entry" field in order to assign the hot key.
3011 Select an action from the list in order to assign the hot key.
3012 The hot key in the key entry field has been used by "
3013 ", If you want to replace this hot key, click Yes. Otherwise, click No to keep the other hot key.
3014 ", please change key(s) in the key entry field.
3015 The selected profile "
3016 " will be deleted. You will lose all the settings in the profile. Do you want to continue?
3017 Delete profile
3018 Keys
3019 Actions
3020 Application names
3021 Desktop
3022 Display
3023 Display %d
3024 Red
3025 Green
3026 Blue
3027 Yellow
3028 Black
3029 Color
3030 Show button for single-display maximize
3031 Show button for full-desktop maximize
3068 Select a desktop:
3069 Select a monitor:
3070 Select a profile:
3071 Properties
3072 The hot key "
3073 " will be removed. You will lose settings for this hot key. Do you want to continue?
3074 You will lose settings for all hot keys. Do you want to continue?
3075 Remove hot key warning
3076 The desktop "
3077 " will be removed. You will lose the desktop and all applications on the desktop will move to your default desktop. Do you want to continue?
3078 Remove desktop warning
3079 You cannot remove the "Default" desktop.
3080 ". Are you sure you want to load new settings?
3081 You are about to overwrite the profile "
3082 ". Do you want to continue?
3083 Save profile warning
3084 NVIDIA Corporation
3085 nView Desktop Manager
3086 Rename Desktop
3087 Default
3088 Open a File
3089 Executable files
3090 Administrator
3091 Profile
3092 " is already a hot key used by the system. Are you sure you want to use it for an nView hot key action instead?
3093 " is already a hot key used by the system. NView will allow you to use this key if you hold it down for more than two seconds.
3094 " is already used by another application as a hot key.
3095 You must click Apply to save your changes before using this function.
3097 You must restart your computer before the new settings will take effect.\n\nDo you want to restart your computer now?
3200 nvwdmcpl
3201 nView Info
3211 Profiles
3212 nvwcpeng.hlp
3213 Your Help String
3216 Windows
3221 Applications
3226 Desktops
3231 User Interface
3236 Effects
3241 Zoom
3246 Hot Keys
3251 Tools
3420 The hot key "
3421 " has been used by the system. Please use other key combination.
3422 " has been used by nView. Please use other key combination.
3423 Hot keystroke error
3424 Enter the hot key by pressing a key combination in the "Hot keystroke" field.
3425 The profile "
3426 " is locked. You cannot save to this profile.
3427 Tools to improve nView functionality for mobile and desktop users.
3428 Provides special windows effects that users can apply to their applications.
3429 Allows customization of the nView user interface.
3430 Allows users to control nView settings on a per application basis.
3431 Hot keys lets users perform various actions with shortcut keys or key combinations.
3432 You have loaded a locked profile - settings cannot be changed.
3433 Locked profile
3434 The current profile "
3435 " is locked. You can not change any settings in a locked profile.\nPlease load an unlocked profile if you want to change settings.
3436 Create a new desktop...
3437 The icon file "
3438 " is in unknown format. Please use other icons.
3439 Bad icon file
3440 This advanced feature allows specific nView Desktop Manager functions to be disabled per application or window class. nView may also be totally disabled for an application. Note that disabling a function overrides all other settings.
3441 If you disable nView functions per application, then only that application will have its functions disabled. If a window class has nView functions disabled, then any window from any application that uses this class will have the selected functions disabled.
3442 Disabling nView functions is recommended only if a particular application or window class is being incorrectly managed by nView Desktop Manager. Note that these disabled nView functions will be saved and restored when you save or load a profile.
3443 NVDesktop is a user interface extension which brings 3D effects to your Windows desktop.
3444 These 3D features include shadowing and lighting effects to create a true depth perspective for windows on your desktop, advanced shadowing features, 3D zoom effects, and a host of animation effects used with Windows and nView actions.
3445 NVDesktop can be turned on and off at any time with a mouse click and offers full customization for advanced users.
3446 NVDesktop is currently in a preview state. While all efforts have been made to make NVDesktop as reliable and compatible as possible, applications may exist which have compatibility problems with NVDesktop.
3447 Please report these issues to NVIDIA Corporation. It is recommended that NVDesktop NOT be used with other skinning programs.
3448 When NVDesktop is enabled, your desktop will run slightly slower.
3449 Installing NVDesktop does not turn NVDesktop on - it simply installs the files to allow NVDesktop to be turned on.
3450 NVDesktop will be uninstalled with your NVIDIA Display Drivers. NVDesktop is only activated if enabled.
4020 The desktop %s
4030 exists in the desktop list. You need to remove the desktop in order to rename other desktops to this name.
4040 Rename desktop warning
4050 The desktop %s
4060 exists in the desktop list. You need to remove the desktop in order to add the desktop with this name.
4070 Add desktop warning
4080 The profile %s
4090 exists in the profile list. You need to remove the profile in order to add the profile with this name.
4100 Add profile warning
4111 Filename
4112 Description
4113 Version
4114 Desktop manager hook library
4115 Shell namespace library
4116 nView Desktop Manager Control Panel
4117 nView Desktop Manager Setup Wizard
4118 Control panel icon program
4119 Internet browser program
4670 Modify profile
4671 Modify your desktop and then click Save to finish saving %s.
4672 Undocked Mode
4673 The system can apply an undocked profile when the tablet PC is undocked. An undocked profile provides a configuration for using the tablet PC as a free-standing tablet or, if an optional tablet PC keyboard is attached, as a free-standing notebook.
4674 View Mode
4675 The system can apply a docked in View mode profile when the tablet PC is docked in View mode. A docked in View mode profile provides a configuration for working within applications on an external display while another application, such as Microsoft Outlook Today, remains open on the tablet PC screen.
4676 Write Mode
4677 The system can apply a docked in Write mode profile when the tablet PC is docked in Write mode. A docked in Write mode profile provides a configuration for writing on the tablet PC screen while retaining access to applications displayed on an external display.
4679 Tabview Profile Help
4680 Windows and Appplications
4681 Desktop Management
4682 Window Manager
4683 Display Mode
4684 Misc
4685 Category for actions. Selecting this item will disable Add button. Selecting the action under this item will enable the Add button.
4801 NVDesktop
4802 Edit Display Gridlines
4803 Choose the display which you want to edit
4804 Enabling or disabling the Desktop Explorer extension requires that you log off. You will be asked to log off when you close this control panel.
4805 You have changed the Desktop Explorer extension state. This requires that you log off. Do you still want to log off (clicking No will revert your Desktop Explorer extension change)?
4806 Start Button
4807 Display Settings
4808 nView Desktop Manager is already opened and has dialog boxes opened on top of it. If you want to open nView Desktop Manager to the assinged page in command line, the program has to close the dialogboxes.\n\nChoose Yes to close the dislogboxes and open to the right page, \nChoose No to leave the current opened nView Desktop Manager alone.
4809 Open nView Desktop Manager Warning
4810 Modify and extend mouse behavior with kinematic actions.
4811 Save Profile
4812 New Profile
4813 Load Profile
4831 Mouse
4832 Load desktop management settings
4833 Load saved application state
4834 Load display mode information
4835 Load taskbar position
4836 Load computer power state
4837 Either type in the name of the Application you want to add below . . .
4838 Application:
4839 Or use the Application Finder tool by dragging it with the mouse over the application window you want to individually manage and then release the mouse.
4840 Add Application for Individual Management
4841 nView Desktop Manager settings can be customized for particular applications and disabled for any combination of applications and/or window classes. Note that individual nView settings can only be applied to applications, but not classes.
4842 Using this tool, you can add an application, a window class or a combination of both to your customized settings list. Either type in the application and/or class name directly or use the Find or Browse tools.
4843 The application and window class selected is already listed in the individual settings list.
4844 The application and window class selected cannot be individually managed by nView.
4845 Last
4846 Increase display
4847 Decrease display
4848 Increase overlay
4849 Decrease overlay
4850 Adjustment
4851 Profile applications
4852 Your profile selections reflect loading/saving no data. Please select data to load or save.
4853 The application state in the profile you are overwriting has been hand-edited. Do you really want to overwrite this application data?
4854 nView gridline enable has not yet been enabled. You must Apply your control panel changes before editing. Do you want to Apply your control panel changes now?
4855 Show button for grid-area maximize
4856 Display driver interface library
4857 Display driver control panel
4858 Warning - a DDI/nView version mismatch has been detected. Using DDI as it is most recent.
4859 Warning - a DDI/nView version mismatch has been detected. DDI is disabled as the driver is more recent.
4860 Info - The DDI version detected does not match the driver. The DDI interface is disabled.
4861 nView toolbar
4862 Disabling multiple desktops will move all applications to the current desktop. Are you sure you want to do this?
4863 Disable nView Multidesk Warning
4864 Load display driver settings
4865 Load desktop colors
4866 Load Direct 3D settings
4867 Load OpenGL settings
4868 Load performance and quality settings
4869 Load edge blending settings
4870 Load overlay and full screen settings
4871 Advanced >>
4872 Advanced <<
4873 Require Shift key to be held down
4874 This profile is locked. \nYou can not save any NVIDIA display driver and desktop manager configurations into the profile.
4875 This profile is unlocked. \nYou can save NVIDIA display driver and desktop manager configurations into the profile.
4876 This profile contains display settings such as resolution, color depth and refresh rate. \nLoad this profile will change display settings.
4877 This profile does not contain display settings such as resolution, color depth and refresh rate. \nLoad this profile will change display settings.
4878 This profile contains description information for the profile.
4879 This profile does not contain description information for the profile.
11038 Edit...
11407 NVKeystoneToggle
11408 NVKeystone
11409 Activate
11410 Adjust...
11411 Options...
11412 Reset
11414 Could not initialize DirectX.\nNVKeystone requires the installation of\nDirectX version 8.0 or greater.
11424 Could not render 3D environment.\nMake sure you are running 16 or 32 bit color depth.\nExiting NVKeystone.
11425 Not enough video memory for NVKeystone.\nPlease switch to a lower resolution or color bit depth.
11426 NVKeystone could not find any hardware-accelerated Direct3D devices.
11427 \n\nNVKeystone will now exit.
11428 NVKeystone could not find any compatible Direct3D devices.
11429 NVKeystone cannot run in a desktop\nwindow with the current display settings.\nPlease change your desktop settings to a\n16- or 32-bit display mode and re-run NVKeystone.
11430 NVKeystone requires functionality that is\nnot available on your Direct3D hardware accelerator.
11431 Your Direct3D hardware accelerator cannot\nrender into a window with the current\ndesktop display settings.
11432 NVKeystone requires functionality that is\nnot available on your Direct3D hardware\naccelerator with the current desktop display\nsettings.
11433 NVKeystone could not reset the Direct3D device.
11434 A Direct3D object has a non-zero reference\ncount (meaning things were not properly\ncleaned up).
11436 Not enough video memory for NVKeystone.\nPlease switch to a lower resolution or color bit depth.
11437 General NVKeystone application error.
12028 Default
13032 Open nView Desktop Manager control panel
13033 Locate cursor
13034 Gather all windows to mon1
13035 Max/Restore window
13036 Show menu extensions
13037 Next desktop
13038 Previous desktop
13039 Run application...
13040 Load profile...
13041 Move window to display...
13042 Move window to desktop...
13043 Activate desktop...
13044 Toggle show on all desktops
13045 Collapse to desktop
13046 Toggle transparency
13047 Toggle always on top
13048 Toggle desktop toolbar
13049 Toggle zoom window
13050 This action will open the nView control panel.
13051 This action will highlight the area around the cursor allowing it to be located on the desktop.
13052 This action will move all open windows and dialogs to a specified display of the current desktop.
13053 This action will toggle a max/restore function for the current window.
13054 This action will pull up the nView menu extensions for the current window.
13055 This action will move the user to the next desktop.
13056 This action will move the user to the previous desktop.
13057 This action will run a user specified application.
13058 This action will load a saved profile.
13059 This action will move the current window to a user specified display.
13060 This action will move the current window to a user specified desktop.
13061 This action will activate a user specified desktop.
13062 This action will toggle the current window between showing on all desktops or on a single desktop.
13063 This action will cause the current window to show on the current desktop only.
13064 This action will toggle the current window between being transparent or opaque.
13065 This action will toggle the current window between being always on top or not.
13066 This action will show and hide the desktop toolbar switcher.
13067 This action will show and hide the zoom window.
14128 (locked)
14129 (modified)
14137 Bitmap files, JPEG files
14138 Icon files
14140 Center
14141 Tile
14142 Stretch
14146 An Active Desktop wallpaper is defined for desktop %s. Since Active Desktop is not enabled, this wallpaper will be disabled.
14147 nView Desktop Wallpaper Error
14153 This wallpaper (%s) can only be used if Active Desktop is enabled. Please enable Active Desktop before choosing this wallpaper.
14214 My presentation profile
14215 Default presentation profile
14220 Default docked profile
14221 My docked profile
14222 Default undocked profile
14223 My undocked profile
14224 Default Write profile
14225 My Write profile
14226 Editing Profile:
14227 Done Editing Profile
14392 Toggle NVKeystone mode
14393 Show nView options menu
14395 Show slides on display
14432 Collapse to title bar
14433 Restore
14434 Show nView options menu
14444 Transparency and the Magnifying Glass style zoom window\nare disabled while running in 256 color mode on any\nscreen or while running a Direct3D, OpenGL or hardware overlay application.
14449 Individual settings for
14451 means enable for this application.
14452 means disable for this application.
14453 means use global settings.
14454 Active
14455 Last
14459 This tab contains information about the nView Desktop Manager and also gives you access to the setup wizard.
14460 A profile contains a record of all nView display settings for easy software setup. Any user can load a profile from the list below. Users with Administrator rights can create their own custom Profile.
14461 Allows control of window and dialog box placement when using multiple displays.
14462 Enables creating up to 32 unique desktops.
14463 Provides dynamic zoom functionality on the desktop and also enables full screen video playback using the Video Mirroring Control button.
14470 Microsoft(R) Internet Explorer(tm) has been extended by nView. To use the extension, from the nView extension menu, choose the display on which you want to open links. To open selected hyperlinks on that display, press Ctrl-left-click or double right-click.\n
14471 PowerPoint(tm) has been extended by nView. To use the extension, choose the display on which you want to display slide shows on.\n\nYou can also disable screen savers and power management during your slide show with the Keep system active choice.\n
14472 Transparency is temporarily disabled because an application that uses DirectX or 3D hardware features is currently running.\n
14473 Transparency is not supported when one of your screens is set to 256 colors.\n
14474 The profile you are attempting to load is an unsupported format
14475 Profile Load Error
14476 Show Zoom Window
14477 Hide Zoom Window
14497 The image file "
14498 " is in unknown format. Please select bitmap (.bmp) or JPEG (.jpg) files.
14499 Bad image file
14503 nView transparency
14504 An application that uses 3D or video overlay is active. Transparency will be disabled until the application is closed.
14505 The application that was using 3D or video overlay has closed. Transparency support is now enabled again.
14507 Application
14508 Class
14509 has individual settings
14510 has no individual settings
14511 all nView functions enabled
14512 all nView functions disabled
14513 some nView functions disabled
14514 Add Application for Individual Management
14515 Select the application which you want to add to the individual application management list.
14516 nView has detected that dragging transparent windows larger than %d by %d pixels may be sluggish on your system. Do you want to disable transparency while dragging windows larger than this?
14517 nView Transparent Drag Performance
14518 An application that just started needs to run in a mode that is not compatible with NVKeystone. Disabling NVKeystone.
14519 NVKeystone is not compatible with NVRotate. Disabling NVKeystone.
14520 nView - Application Add Error
14521 The file selected is not an application. It will not be added to the application list.
14522 The application selected is already listed in the individual settings list.
14523 The application selected cannot be individually managed by nView.
14524 The window class selected is already listed in the individual settings list.
14525 The window class selected cannot be individually managed by nView.
14547 Fixed Frame
14548 Show Fixed Frame
14549 Auto-move zoom window
14550 Display Calibration Screen
14551 Adjust your display to maximize image quality now. If your display has an Auto-Adjust feature, run it now.
14552 When done adjusting, press any key to exit.
14553 nView Display Mode
14554 Dualview
14555 Standard
14556 Card %d
14557 Output %d
14558 NVIDIA nView Setup Wizard
14559 The mode selected will require restarting your computer. Your computer will restart when you click Finish on the last wizard page.
14560 Zoom Window
14561 All rights reserved
14578 nView Desktop Manager allows you to set up custom window management settings per application on your computer. These settings include window relocation, dialog box, and launch settings.
14579 To enable a Window or dialog box setting for the application, check the box with a black checkmark. To disable, uncheck the box. To use the global settings, check the box with a gray or block check.
14580 Launch settings control the state of the application when it is started. By default, the setting is off. To force a setting to be on at launch, select the On option. To have a window setting remembered when you close the application and then restored when the application is launched again, select Last Setting.
14581 To launch an application on a specific desktop, select the desktop from the drop-down menu or select Active to launch applications on the currently active desktop.
14582 nView supports three different multi-display modes under Windows 2000. Dualview mode treats every display as a separate device by Windows. Span mode treats multiple displays as a single large desktop. Clone mode displays the same image on both displays.
14583 These settings can be changed at any time from the Windows Display Properties window and the nView Display Mode tab. Switching between Dualview and either Span or Clone modes requires restarting your computer; switching between Clone and Span mode does not.
14587 NVKeystone Adjustment
14588 Drag corners with mouse
14589 Use arrow keys for fine adjust
14590 OK
14591 - done adjusting
14592 Cancel
14593 - cancel changes
14594 Reset
14595 - clear adjustments
14596 Options
14597 - edit options
14603 Switch to next display device
14604 Toggle clone mode
14605 This hot key is not supported when multiple displays are active.
14606 ToggleOutput
14607 ToggleClone
14630 This action will switch NVKeystone between Active, Adjust, and Off modes.
14631 This action will move your display output to the next display device.
14632 This action will toggle clone mode on or off.
14633 Allow taskbar to span multiple displays
14634 Limit taskbar to a single display
14635 Center dialog boxes on application's window
14636 nView status indicator for window
14637 nView individual settings indicator
14638 This application is using individual settings.
14639 Make nView caption bar buttons transparent
14640 This hot key is only operational if you have more than one display and you are in clone or single display mode.
14642 Magnifying Glass
14644 NVIDIA nView Individual Application Help
14645 Centered on Cursor
14647 Help
14648 Disable nView Desktop Manager functions
14681 NviewDebugHotkey
14683 Active Desktop wallpaper(s) are defined for one or more desktops.\n%s\n\nSince Active Desktop is not enabled, the wallpaper(s) will not be visible. To display the wallpaper(s), enable Active Desktop.
14684 An Active Desktop wallpaper is defined for desktop %s. Since Active Desktop is not enabled, this wallpaper will not be visible. Please enable Active Desktop to display this wallpaper.
14685 PerformanceDataDump
14811 Per display
14812 Standard
14813 Display %s wallpaper.
14815 Desktop wallpaper:
14816 Desktop wallpaper for display %s:
14817 No applications on this desktop.
14819 Would you like to enable Active Desktop?
14820 ColorAction
14823 Toggle color keyed window
14824 The selected application has closed.
14825 The selected application is loading.
14850 This action will toggle the color keyed window to be maximized on the current desktop
14851 Color Key Warning
14852 All current enabled colors are being used by individual application settings. Colors will not be automatically assigned until there are free colors.
14853 Open windows are using this color. Clicking OK will disable the color and will cause these windows to lose their color key.
14854 An application is set up to use the disabled color %d through individual settings. This application will now open without a color key.
14855 Color key %d
14856 nView Critical Error
14857 nView experienced a critical error. It is strongly recommended that you save all open documents and then log off and back on (or else restart your computer).
14858 Color Key
14860 Off
14861 Low
14862 Medium
14863 High
14864 A multi-display mode is selected on the Settings tab. Please change to a single-display mode before enabling your displays.
14865 You must log off to disable and unload nView Desktop Manager from memory when the Desktop Explorer shell extension is enabled.\n\nClick OK to log off or Cancel to only disable Desktop Manager, which remains in memory until you log off.
14869 nView has detected that %s is a 16-bit application. Many 16-bit applications are incompatible with nView Desktop Manager and can crash when running Windows 98 or Windows Me. NVIDIA recommends disabling nView Desktop Manager if you run 16-bit applications.
14870 Click Yes below to unload nView Desktop Manager from memory. Close and relaunch %s after Desktop Manager has unloaded; Desktop Manager restarts when you log on again.
14871 To permanently disable Desktop Manager, use the nView Desktop Manager control panel. Do you want to unload Desktop Manager?
14872 Digital Vibrance:
14873 NVMax
14874 NVMax/Restore window
14875 This action will toggle an nView max/restore function for the current window
14876 NVCollapse
14877 Collapse/Restore window
14878 This action will toggle an nView collapse/restore function for the current window.
14879 The nView task switcher action requires the Alt key to be in the key combination.
14890 The nView task switcher is not enabled. Would you like to enable the nView task switcher?
14893 Unable to disable video overlay. Please close all applications that are using the video device and try again.
14895 TogglePower
14896 Filename
14897 Description
14898 Version
14899 Show Gridlines
14900 Frame Window
14901 Desktop Manager hook library
14902 Shell namespace library
14903 Desktop Manager properties panel
14904 nView Desktop Manager Setup Wizard
14905 Control panel icon program
14906 Internet browser program
14907 When checked, turns off hardware overlay so video playback windows can be skewed by NVKeystone.
14908 When checked, NVKeystone unloads itself from memory after 30 seconds of inactivity.
14909 When checked, antialiasing filtering is performed on the NVKeystone image.
14910 Select the display that you want NVKeystone to skew.
14911 When checked, one mouse click selects a drag point, a second mouse click releases.
14912 You can set up a hot key to change NVKeystone modes.
14913 When checked, NVKeystone displays gridlines on the NVKeystone Adjustment Screen.
14927 The desktop %s
14928 exists in the desktop list. You need to remove the desktop in order to rename other desktops to this name.
14929 Rename desktop warning
14930 exists in the desktop list. You need to remove the desktop in order to add the desktop with this name.
14931 The profile %s
14932 exists in the profile list. You need to remove the profile in order to add the profile with this name.
14933 Add profile warning
14934 Add desktop warning
14935 NVKeystone Power Warning
14936 Desktop Explorer
14942 HiddenRun
14954 The current Span mode resolution is too high for NVKeystone to support. Please switch to a lower resolution before enabling NVKeystone.
14955 Windows Color Keying
14956 Color keying is not currently enabled. Would you like to enable color keying?
15600 Enabled
15602 Disabled
15603 Display
15604 The displays are not in a rectangular area, you will not be able to apply this arrangement.
15605 The enabled displays must be in a rectagular area and no disabled displays are allowed in the rectangular area.
15606 Illegal Arrangement
15608 Display width or height is 0
15609 Warning
15610 Enabled displays must be arranged in a rectangular area before you can apply settings. No disabled display is allowed in this rectangular area.
15611 Total desktop area of
15612 Use the Settings tab to change resolutions.
15613 nView requires version 4.0 or higher of Internet Explorer(tm) to be installed - exiting wizard install. After you install version 4.0 of Internet Explorer and restart, this wizard will appear again. Note that although nView requires Internet Explorer to be installed, other browsers may be used for web browsing.
15614 NVIEW ERROR
15615 NVIEW UNINSTALL ERROR
15616 nView Uninstall
15617 Desktop Explorer
15618 The Desktop Explorer extension requires version 6.0 or later of Internet Explorer(tm) to be installed. Note that although Desktop Explorer requires Internet Explorer 6.0 to be installed, other browsers may be used for web browsing.
15619 You must log off in order to enable or disable the Desktop Explorer. Click Yes to log off now, No to ignore your change.
15620 Windows is unable to log off and must restart instead. Click OK to restart your computer or Cancel to ignore your change.
15621 This control panel is disabled when nView Desktop Manger is running in a two-display Span mode. Click Advanced to change.
15622 Smooth filtering
15623 Lock zoom source
15624 Fixed source
15625 Enable editing
15626 Present on display
15627 Prevent Web popups
15628 Open attachments on display
15629 Enable taskbar spanning across displays
15630 Make taskbar span across displays
15631 Enable video zooming
15632 Your Multiview settings have been configured. Do you want to keep these settings?
15633 Show mouse cursor
15634 Analog
15635 Digital
15636 Both
15637 nView can operate in two modes: Span and Multiview. Span mode allows using up to a maximum of two displays and supports hardware-accelerated OpenGL. Multiview mode (default) supports up to 16 displays but OpenGL is not hardware-accelerated. You can switch modes using the check box below (requires restarting your computer). Note that in Span mode, the nView Multiview control panel is disabled and display arrangement is set through a new nView tab.
15638 You must restart your computer to change your mode. Click OK to restart.
15639 Restart for mode change
15640 Restores window
15641 Your display may not be able to handle this change of output type. Are you sure you want to change the output type?
15642 Generic
15643 Advanced
15644 Finance
15645 Disable application state memory
15646 Application state memory
15647 Transparency has been temporarily disabled while a 3D applicationis running on the desktop. Transparency will be re-enabled when the 3D applicationcloses.
15648 Gather all applications to display 1
15649 Clear all application settings
15650 Recover Windows
15651 Enable nView extension button on title bars
15652 Collapses window to title bar
15653 Accesses nView extension menu
15654 Shift-click (left mouse button) on hyperlinks to use feature.
15655 Revert in 15 second
15656 Revert in %d seconds
15657 You will now apply your new Multiview settings.\n\nIf your new settings are not applied correctly, your original settings will be automatically restored in 15 seconds.
15658 Multiview
15659 There is a 3D application running that is using hardware OpenGL acceleration, the display driver could not support Multiview multi displays under this condition. \n\nPlease quit the 3D application then apply this settings or you can click Advance button on Multiview tab to setup span mode.\n\nThe span mode will support hardware OpenGL acceleration.
17000 Select a theme
17019 NVDesktop
17020 Activate
17021 Options...
17022 Themes
17023 ToggleCursorZoom
17024 Toggle cursor Magnifying Glass
17025 This action will toggle Cursor-style zoom window on or off.
17026 This feature requires NVDesktop to be active.
17027 Would you like to activate NVDesktop now?
17028 Would you like to install NVDesktop now?
17030 NVDesktop
17031 Are you sure you want to uninstall NVDesktop?
17032 Uninstalling NVDesktop requires that you restart your computer. Click OK to restart now.
17033 This feature requires NVDesktop to be deactivated.
17034 Would you like to deactivate NVDesktop now?
17035 This feature requires NVKeytsone to be deactivated.
17036 Would you like to deactivate NVKeystone now?
17037 Uninstallation of NVDesktop failed!
17038 There was an error loading NVDesktop. Please reinstall and try again.
17040 Your new NVDesktop settings have been applied. Click OK to keep the settings or Cancel to revert to your prior settings.
17041 Please wait
18221 New desktop
18269 Thumbnails
18270 Disabled
18271 Wallpaper
18272 Screenshot
18273 Geometry
18274 Small
18275 Medium
18276 Default
18277 Large
18278 Name
18279 Desktop
18280 Applications
18281 Application
18282 Location
18283 Thumbnail mode selection.
18284 Disables thumbnails and displays the desktop or application icon.
18285 Displays the desktop wallpaper or the application icon.
18286 Displays a screenshot of the desktop
18287 Displays shaded windows to represent application positions
18288 You are attempting to load a non-Windows NT 4 profile display mode on an Windows NT 4 system!\n\n\Ignoring display mode information.
18289 Warning - You are attempting to load a Windows NT 4.0 display mode that requires your system to be in Multiview mode.\n\nPlease change to Multiview mode before loading this profile's display mode.
18290 Warning - You are attempting to load a Windows NT 4.0 display mode which requires your system to be in Span mode.\n\nPlease change to Span mode before loading this profile's display mode.
18291 You are attempting to load a Windows NT 4.0 Multiview profile display mode on a non-NT4 system!\n\n\Ignoring display mode information.
18292 You cannot load an NVDeploy file which has both Span/Clone modes and Dualview modes on W2K!\n\nIgnoring display mode information.
18293 Warning - You are attempting to load a W2K display mode which requires your system to be in Dualview mode.\n\nPlease change to Dualview mode before loading this profile's display mode.
18294 Warning - You are attempting to load a W2K display mode which requires Dualview mode to be disabled.\n\nPlease turn off Dualview mode before loading this profile's display mode.
18295 Warning - The display mode contained within the profile will not be applied until you restart your system.
18296 Profile Display Mode Load
18297 Error while loading nView Engine:\n\nnView cannot load. This problem is usually caused by either a bad DirectX install or else corrupted NVIDIA driver files on your disk.\n\nWe recommend you uninstall your NVIDIA driver, run scandisk (or any disk check tool), re-install DirectX, and then re-install your NVIDIA driver.
18298 Full Screen Video Zoom...
18299 Send all windows to display
18300 RotateMonitor
18302 Rotate display
18303 Rotate desktop
18304 RotateCustom
18305 DisplayEDocs
18306 HiddenToggleTV
18307 HiddenToggleLCDScale
18308 Rotation amount
18309 Degrees
18310 Toggle rotation
18311 Rotate each display individually
18312 Rotate entire desktop
18313 Span mode displays cannot be rotated.
18314 You have programmed the display to a non-standard viewing mode and it\n cannot be rotated without restarting your computer. Do you want to restart your computer now?
18315 This action will rotate the display (or the desktop) by an amount you specify.
18316 ShowGrid
18317 Show display grid
18318 Shows all defined gridlines and anchor points on your desktop when clicked.
18319 EditGrid
18320 Edit display grid
18321 Allows gridlines and anchor points to be defined for the display where the cursor appears.
18322 NVKeystone is not currently enabled. Would you like to enable keystone?
18323 NVKeystone cannot be enabled. Please make sure you are not running any screens in 256-color mode and that you have installed DirectX 8.1.
18324 ToggleLCDScale
18325 ToggleTV
18326 Toggle to TV output
18327 Toggle LCD scaling
18328 Toggles display output to and from TV
18329 Toggles LCD scaling on and off
18330 nView Hot Key Error
18331 This hot key is not available when there are more than two display devices attached to the computer.
18332 This hot key requires that both the TV output AND either a CRT or LCD is connected.
18333 No LCD panels were detected to be attached to your graphics card. Ignoring the LCD scaling toggle hot key.
18334 This hot key is only operational if you have more than one display available and you are in a single display mode.
18335 NVKeystone is being used to perform luminosity compensation for your desktop (NVKeystone is generally used for "projected blending.") Disable NVKeystone to turn off this luminosity compensation function.\n\nClick OK to disable NVKeystone.
18338 This action will allow you to switch between applications on the currently selected desktop (the default is Alt-Tab).
18339 NVTaskSwitchSystemApps
18340 nView task switcher: toggle all applications
18341 This action will allow you to switch between applications on all desktops.
18342 NVTaskSwitchDesktops
18343 nView task switcher: toggle desktops
18344 This action will allow you to switch between desktops.
18345 NVToolbar
18346 Toggle nView toolbar
18347 This action will show and hide the nView toolbar.
18348 ShowDeskName
18349 This action will show the current desktop name
18350 Show desktop name
18351 Move windows to
18352 CollapseAll
18353 Collapse all windows
18354 Collapses all windows to their title bar on the current desktop (and restores if all windows are collapsed)
18355 ZoomType
18356 Toggle zoom type
18357 Toggles zoom window style between Cursor, Magnifying Glass, and Fixed Frame
18358 Brightness
18359 Adjust display brightness
18360 Adjusts the brightness ≤f the display device where the cursor appears
18361 Contrast
18362 Adjust display contrast
18363 Adjusts the contrast of the display device where the cursor appears
18364 Gamma
18365 Adjust display gamma
18366 Adjusts the gamma of the display device where the cursor appears
18367 RefreshTrans
18368 Toggle window Z-order
18369 Toggles the window Z-order to top or to bottom
18370 Minimize window
18371 Toggles the current window between a minimized and restored state
18373 <none>
18374 Gather all
18375 Zoom window
18376 Zoom type
18377 nView control panel
18378 Window->monitor
18379 Window->desktop
18380 Max/Restore
18381 NVMax/Restore
18382 Toggle on top
18383 Minimize/Restore
18384 Collapse/Restore
18385 Toggle Z-order
18386 Color key
18387 Window->all desktops
18388 Toggle NVKeystone
18389 nView options menu
18390 Toggle output
18391 Cursor zoom
18392 Toggle NVToolbar
18393 Collapse all
18394 This application has a window style that is not compatible with transparency! Allowing transparency could result in drawing errors or could cause the application to crash. Are you sure you want to do this?
18395 Enable transparency warning
18396 nView
18397 This window does not support the collapse to title bar functionality properly. nView will disable the collapse to title bar function for this window.
18398 SendToNextMon
18399 Move window to next display
18400 This action will move the current window to the next display.
18401 Window->next display
18402 SaveProfile
18403 Save profile...
18404 This action will save to the profile selected.
18405 GammaReset
18406 Reset gamma, brightness, and contrast to default
18407 Resets the graphics card gamma, brightness, and contrast settings to default values for the current display.
18408 Reset gamma
18409 nView Error
18410 nView Desktop Manager is not available on remote sessions.
18411 nView Desktop Manager requires Windows NT 4.0 Service Pack 4 or higher. Desktop Manager will now exit.
18412 nView requires Internet Explorer 5.0 or higher to be installed on Windows NT 4.0.
18413 Your computer is currently running on battery power. NVKeystone will increase your power usage. Are you sure you want to enable NVKeystone?
18414 nView detected an older registry structure (probably due to installing over an older driver), which it was unable to correct.\n\nThe nView enabled state cannot be changed until you log on with Administrator rights.
18415 You have exceeded the maximum number of applications (eight) you can use with the ""Save open application state"" option. nView will save the state for the first eight applications found.
18416 Press any key to turn off the alignment screen.
18417 Export...
18418 Import...
18419 Please browse to the location where you want to export this profile.
18420 Please browse to the location that contains the profile you want to import.
18421 Show edge blending alignment
18422 Warning - You are attempting to load a display mode which requires your system to be in Multiview mode.\n\nPlease change to Multiview mode before loading this profile's display mode.
18423 Warning - You are attempting to load a display mode which requires your system to not be in Multiview mode.\n\nPlease turn off Multiview mode before loading this profile's display mode.
18424 This feature is not available under Multiview.