131 Sorry, but complex discontinuous selections can neither be copied to the clipboard nor dragged!
133 Sorry, but the data from the clipboard could not be pasted due to an internal error!
135 Sorry, but you can't move the selected data to this location, because the destination is contained within the source selection or one of its children!
146 Synchronize tree and table views\nSynchronize views
151 Expand all selected items\nExpand all selected (Num +)
153 Collapse all selected items\nCollapse all selected (Num -)
155 Fully expand all selected lines\nFully expand all selected (Num *)
157 Customize program settings\nSettings
159 Move element right\nMove right
161 Move element left\nMove left
165 The name of the selected item will be lost in the conversion process. Are you sure, you want to convert this item?
166 The text of the selected item will be lost in the conversion process. Are you sure, you want to convert this item?
168 Cannot find entered text!
170 1998-99 Icon http://www.xmlspy.com
172 Page %d
207 Print the active document\nPrint
209 Sorry, but the file "%s" could not be opened!
211 Please register this software to get the newest version as soon as it will be available!
212 As a registered user you will automatically be informed about new versions as they become available!
213 The Grammar-File "%s" describing the XML grammar rules for the Parser module PARSO could not be found or contains an error. Please reinstall this file from the setup program.
214 %s expected.
215 Unknown parse error.
217 name of %s cannot be empty!
218 %s cannot have %s as child!
220 The contents of %s cannot be empty!
221 %s cannot have more than one %s!
223 %s requires one %s!
224 %s expected!
225 Illegal character(s) used!
227 Adjust widths of all columns to optimal settings for the text shown\nOptimal widths
228 Validate file\nValidate file
230 A DOCTYPE may contain only one ExternalID!
231 Name of %s must be either SYSTEM or PUBLIC!
234 Create a new DTD-document\nNew DTD-Document
235 Create a new XML-document\nNew XML-Document
236 Text in %s must contain PE-References!
237 Sorry, but there is nothing to print! Please modify your print settings.
241 The replace operation has been stopped in response to your <ESC> key request.\nPlease note that you can undo each individual replacement using the "Undo" command on the "Edit" menu.
242 Registered to %s (%s)
243 EVALUATION VERSION!
244 edited with XML Spy
245 edited with XML Spy v%s - http://www.xmlspy.com
246 It is mandatory that you personalize your copy of XML Spy. The program will not operate unless you enter your name! You may leave the company field empty, if you intend to use the program for private purposes only.\nAre you sure that you want to exit XML Spy?
247 We are sorry, but XML Spy will not be able to run unless you enter at least your name!
248 private version
249 Please verify your entries before proceeding with the personalization:\n\nUser: %s\nCompany: %s
250 Thank you for personalizing this copy of XML Spy!\nYou now have 30 days to evaluate this software...\nIf you wish to purchase XML Spy, please go to http://www.xmlspy.com/order/ and enter your personal order-code: %s
251 Open an exisiting document directly from a URL\nOpen URL
252 Thank you for registering XML Spy!\nThe next screen will show you the registration info for this copy of the software, which cannot be edited.
253 We are sorry, but the key-code you have entered is invalid or does not match your order-code!\nPlease verify that you have entered it exactly as it appears in your order confirmation e-mail!\nHint: if you see a '0' in the key-code it is definitely the number zero and not a capital 'O' letter.
254 Thank you for registering XML Spy!\nWe will automatically keep you informed about future products or upgrades via e-mail. If you have any questions about XML Spy, please use the "Support area" command on the "Help" menu.\n\nPlease help us improve XML Spy by filling out the questionnaire on the "Help" menu.
255 This is just a quick reminder that you have already been evaluating XML Spy for a period of %ld days! You may continue to evaluate this software for up to 30 days after you have installed it.\nIf you wish to purchase a license now, please use the "Registration" command on the "Help" menu...
256 We must inform you, that you have already been using XML Spy for %ld days, whereas the evaluation period of this software is limited to 30 days.\nTo continue using XML Spy please use the "Registration" command on the "Help" menu to purchase a license.\n\nIf you believe you didn't have enough time to evaluate this software or if you have already tested a previous version, you may also request an extension of your evaluation period. Please mail your request (with a short explanation why you need such an extension) to sales@xmlspy.com and we will gladly send you a time-limited key-code that unlocks XML Spy for another 30-day period.
257 %ld...
258 We are sorry, but the font you have selected cannot be used on this version of Windows, because it does not contain any characters for the regular (Latin-1) character set.\nThis will most likely happen, if you attempt to simply copy a multi-byte font from a FarEast version of Windows to a European or American version. Please install full support for CJK character encodings using your Windows setup CD-ROM.
275 Register your copy of XML Spy...
276 Open XML Spy Homepage...
277 Open Icon Homepage...
278 Open order form...
279 Open support form...
280 Open on-line manual...\nSpy manual...
281 Show startup screen upon program startup
282 Set or remove Namespace prefix from selected Elements and Attributes\nNamespace prefix
283 The Namespace prefix you've entered is not well-formed!
284 Please help us improve our product, by answering this simple questionnaire on our web-server...
286 Set or change the character-set encoding for the current file\nEncoding...
287 The XML-Declaration must contain a "version" and optionally "encoding" and "standalone" specifications.
288 The XML-Declaration for DTDs must contain an "encoding" and optionally a "version".
289 The current version of XML Spy cannot save files in the "%s" encoding you have entered into the XML-Declaration. Please click OK and choose a supported encoding or click Cancel to abort saving.\n\nIf you are a registered user and need support for different encodings, please contact our technical support using the "Support..." command on the "Help" menu.
290 Your document contains %d character(s) that cannot be represented in the %s encoding you have used for editing this file. If you proceed, these characters will be replaced by an under-score character ('_') in the output file. You may wish to use the Windows NT version of XML Spy if you want to avoid this problem.\n\nDo you wish to continue saving the document?
291 Your document contains %d character(s) that cannot be represented in the %s character-set encoding. If you proceed, these characters will be replaced by an under-score character ('_') in the output file.\n\nDo you wish to continue saving the document using this encoding?
292 Your file contains %d character(s) that should not be present in a file using the %s encoding. If you proceed, these characters will be replaced by a substitution character in the document window.\n\nDo you wish to continue opening the document?
293 Your file contains %d character(s) that cannot be represented in the %s encoding you have selected for editing. If you proceed, these characters will be replaced by an under-score character ('_') in the document. Please select a different code-page or use the Windows NT version of XML Spy to edit this document.\n\nDo you wish to continue opening the document using this encoding?
294 Your file specifies an encoding="%s" that is not (yet) supported by XML Spy. This file will instead be interpreted according to the %s encoding.\n\nWhen you save the file, it will be saved according to the encoding-specification in the XML-declaration.\n\nIf you are a registered user and need support for this encoding, please contact <support@xmlspy.com> via e-mail.
295 Your file specifies an encoding="%s" that is not (yet) supported by XML Spy. This file will instead be interpreted according to the %s encoding that you have selected as the default in the settings dialog.\n\nWhen you save the file, it will be saved according to the encoding-specification in the XML-declaration.\n\nIf you are a registered user and need support for this encoding, please contact <support@xmlspy.com> via e-mail.
296 Your file specifies an encoding="%s" that does not match the actual encoding of the file, which definitely is %s.\n\nWhen you save the file, it will be saved according to the encoding-specification in the XML-declaration.
297 Your file specifies an encoding="%s" that does not match the actual encoding of the file. This file will instead be interpreted according to the %s encoding that you have selected as the default in the settings dialog.\n\nWhen you save the file, it will be saved according to the encoding-specification in the XML-declaration.
298 Temporary file could not be created!
299 Temporary file "%s" could not be deleted!
300 Settings
303 Element names
304 Attribute names
305 Reserved words
307 View current file in browser window\nBrowser view
308 Edit current file in Enhanced Grid view\nEnhanced Grid view
309 Edit current file in Source view\nSource view
310 Element names
311 Attribute names
312 Contents
313 Operator
314 Comments
315 CData
316 Processing instructions
317 DOCTYPE
318 Contents
319 Element namespaces
320 Attribute namespaces
321 Attribute previews
327 Create a new RDF-document\nNew RDF-Document
328 Grid fonts
329 Source fonts
338 Go back one step\nBack
339 Go forward one step\nForward
340 Stop opening file\nStop
341 Refresh the contents\nRefresh
342 Show preview in a separate window\nSeparate window
346 Select largest font size
347 Select large font size
348 Select medium font size
349 Select small font size
350 Select smallest font size
351 Check the document for well-formedness\nCheck well-formedness
352 We are sorry, but DTD-Validation is only available, if you have installed the Microsoft XML Parser, which is a component of Internet Explorer 5.0 (or higher).
353 This file is well-formed. Please note: XML Spy 2.5 can now also validate an XML file against its document type definition (requires Internet Explorer 5.0).
354 This file is well-formed.
355 This file is not well-formed:\n%s
356 This file is valid.
357 This file is not valid:\n%s
358 Create a new XHTML-document\nNew XHTML-Document
359 Create a new XSL-document\nNew XSL-Document
360 Create a new 3DML-document\nNew 3DML-Document
361 (see %s)
362 This file is not well-formed! If you save the file in its current state, other XML processors may have a problem opening the file. The next time you open this file in XML Spy, it will be presented in the Source View and the well-formedness violation will be selected.\n\n Are you sure to save this file as is?
363 This file is not well-formed! If you save the file in its current state, other XML processors may have a problem opening the file.\n\n Are you sure to save this file as is?
367 Open Japanese XML Spy page at Toshiba Advanced Systems
368 Visit the Microsoft Internet Explorer 5 web-site
369 Visit the Open Directory Project XML area
5101 Insert an Attribute before selected one\nInsert Attribute
5102 Insert an Element before selected item\nInsert Element
5103 Insert Text before selected item\nInsert Text
5104 Insert a CData before selected item\nInsert CData
5105 Insert a Comment before selected item\nInsert Comment
5106 Insert a XML-Declaration before selected item\nInsert XML-Declaration
5107 Insert a Processing Instruction <?...?> before selected item\nInsert Processing Instruction
5108 Insert a DOCTYPE before selected item\nInsert DOCTYPE
5109 Insert a DOCTYPE-ExternalID before selected item\nInsert DOCTYPE-ExternalID
5110 Insert a DOCTYPE-ELEMENT before selected item\nInsert DOCTYPE-ELEMENT
5111 Insert a DOCTYPE-ATTLIST before selected item\nInsert DOCTYPE-ATTLIST
5112 Insert a DOCTYPE-ENTITY before selected item\nInsert DOCTYPE-ENTITY
5113 Insert a DOCTYPE-NOTATION before selected item\nInsert DOCTYPE-NOTATION
5201 Append an Attribute to parent of selected element\nAppend Attribute
5202 Append an Element to parent of selected one\nAppend Element
5203 Append Text to parent of selected element\nAppend Text
5204 Append a CData to parent of selected element\nAppend CData
5205 Append a Comment to parent of selected element\nAppend Comment
5206 Append Processing Instruction <?...?> to parent of selected element\nAppend Processing Instruction
5207 Append an XML-Declaration to parent of selected element\nAppend XML-Declaration
5208 Append a DOCTYPE to parent of selected element\nAppend DOCTYPE
5209 Append a DOCTYPE-ExternalID to parent of selected element\nAppend DOCTYPE-ExternalID
5210 Append a DOCTYPE-ELEMENT to parent of selected element\nAppend DOCTYPE-ELEMENT
5211 Append a DOCTYPE-ATTLIST to parent of selected element\nAppend DOCTYPE-ATTLIST
5212 Append a DOCTYPE-ENTITY to parent of selected element\nAppend DOCTYPE-ENTITY
5213 Append a DOCTYPE-NOTATION to parent of selected element\nAppend DOCTYPE-NOTATION
5301 Add a child Attribute to selected element\nAdd child Attribute
5302 Add a child Element to selected one\nAdd child child Element
5303 Add child Text to selected element\nAdd child Text
5304 Add a child CData to selected element\nAdd child CData
5305 Add a child Comment to selected element\nAdd child Comment
5306 Add a child XML-Declaration to selected element\nAdd child XML-Declaration
5307 Add a child Processing Instruction <?...?> to selected element\nAdd child Processing Instruction
5308 Add a child DOCTYPE to selected element\nAdd child DOCTYPE
5309 Add a child DOCTYPE-ExternalID to selected element\nAdd child DOCTYPE-ExternalID
5310 Add a child DOCTYPE-ELEMENT to selected element\nAdd child DOCTYPE-ELEMENT
5311 Add a child DOCTYPE-ATTLIST to selected element\nAdd child DOCTYPE-ATTLIST
5312 Add a child DOCTYPE-ENTITY to selected element\nAdd child DOCTYPE-ENTITY
5313 Add a child DOCTYPE-NOTATION to selected element\nAdd child DOCTYPE-NOTATION
5401 Convert selected item to Attribute\nConvert to Attribute
5402 Convert selected item to Element\nConvert to Element
5403 Convert selected item to Text\nConvert to Text
5404 Convert selected item to CData\nConvert to CData
5405 Convert selected item to Comment\nConvert to Comment
5406 Convert selected item to XML-Tag\nConvert to XML-Tag
5407 Convert selected item to Processing Instruction <?...?>\nConvert to Processing Instruction
5408 Convert selected item to DOCTYPE\nConvert to DOCTYPE
5409 Convert selected item to DOCTYPE-ExternalID\nConvert to DOCTYPE-ExternalID
5410 Convert selected item to DOCTYPE-ELEMENT\nConvert to DOCTYPE-ELEMENT
5411 Convert selected item to DOCTYPE-ATTLIST\nConvert to DOCTYPE-ATTLIST
5412 Convert selected item to DOCTYPE-ENTITY\nConvert to DOCTYPE-ENTITY
5413 Convert selected item to DOCTYPE-NOTATION\nConvert to DOCTYPE-NOTATION
57344 XML Spy
57345 XML Spy v%s %s (c)1998-99 Icon Information-Systems
57600 Create a new document\nNew
57601 Open an existing document\nOpen
57602 Close the active document\nClose
57603 Save the active document\nSave
57604 Save the active document with a new name\nSave As
57605 Change the printing options\nPage Setup
57606 Change the printer and printing options\nPrint Setup
57607 Print the active document\nPrint
57609 Display full pages\nPrint Preview
57616 Open this document
57617 Open this document
57618 Open this document
57619 Open this document
57620 Open this document
57621 Open this document
57622 Open this document
57623 Open this document
57624 Open this document
57625 Open this document
57626 Open this document
57627 Open this document
57628 Open this document
57629 Open this document
57630 Open this document
57631 Open this document
57632 Erase the selection\nErase
57633 Erase everything\nErase All
57634 Copy the selection and put it on the Clipboard\nCopy
57635 Cut the selection and put it on the Clipboard\nCut
57636 Find the specified text\nFind
57637 Insert Clipboard contents\nPaste
57640 Find next occurrence\nFind next
57641 Replace specific text with different text\nReplace
57642 Select the entire document\nSelect All
57643 Undo the last action\nUndo
57644 Redo the previously undone action\nRedo
57648 Open another window for the active document\nNew Window
57649 Arrange icons at the bottom of the window\nArrange Icons
57650 Arrange windows so they overlap\nCascade Windows
57651 Arrange windows as non-overlapping tiles\nTile Windows
57652 Arrange windows as non-overlapping tiles\nTile Windows
57653 Split the active window into panes\nSplit
57664 Display program information, version number and copyright\nAbout
57665 Quit the application; prompts to save documents\nExit
57680 Switch to the next window pane\nNext Pane
57681 Switch back to the previous window pane\nPrevious Pane
59136 EXT
59137 CAP
59138 NUM
59139 SCRL
59140 OVR
59141 REC
59392 Show or hide the toolbar\nToggle ToolBar
59393 Show or hide the status bar\nToggle StatusBar
61184 Change the window size
61185 Change the window position
61186 Reduce the window to an icon
61187 Enlarge the window to full size
61188 Switch to the next document window
61189 Switch to the previous document window
61190 Close the active window and prompts to save the documents
